anthonyh90

go on clean your car and have a look at there kits for the Das-6 pro, you can get some good deals and its cheaper than the meguiars

may be worth investing in some optimum no rinse car wash. Directions: Add 1 oz. of Optimum No Rinse to 1-2 gallons of water to make a no rise car wash. Soak Optimum Xtra Large Microfiber Towel in the wash bucket. Wash one car panel. Soak the towel in the wash bucket again and do another panel till the entire vehicle is washed. Use a fresh Xtra plush Microfiber Towel to dry the car. You can also dry and wax your vehicle by spraying Optimum Car wax on each panel as you are drying it. Add 1 ounce to wash water made with your regular car wash. No Rinse Wash & Shine's advanced polymers and lubricants offer more surface protection and slickness than ordinary car soap alone. It acts as a water softener and conditioner to improve the quality of the water that touches your vehicle to provide the ultimate safe wash. Add 2 ounces of No Rinse Wash & Shine to a gallon of water to make a super-slick clay bar lubricant. Wet the surface of your vehicle to provide a slippery protective layer beneath your clay. After you've clayed each section, simply wipe it dry. This solution is as effective as any clay lubricant you can buy! Add 6 ounces of No Rinse Wash & Shine to a gallon of water to make an excellent quick detailer. Fill up a spray bottle with this mixture and use it to clean and shine your vehicle, just as you would use a traditional detailer. The proprietary polymers bond to the paint surface to protect it from abrasion and micro-marring as you clean. The incredible formula leaves your vehicle extremely slick and glossy, like you just applied wax

i've got the pioneer avh-3300bt in my vrs. it fits perfect. you just need a £3 piece of dash trim from the dealer to fit in the space above it

yeah it can be quite expensive, i only done mine that way as it was part of a group buy in june last year so i got the sts unit for free. it may be best trying to pick up a pre-owned sts system from fleabay and contacting shark to see what they say

if your not wanting to travel down to shark you can always get their self tuning system, that's how i done mine. you just download the current map of your car and send it to shark. then a few days later your you receive your new map for your car. you then just flash the new map onto the car and enjoy.

i use Finish Kare 1000p. can be used on paintwork too

I know. Will do in the morning as I'm browsing the site on the mobile. I use about 1" of snowfoam in the bottle and then topped up with water. It comes out like a slightly weaker shaving foam

Lol I'm using autobrite magifoam. Seems to stay on the car a lot longer than most foams although it is then a pita to remove from the driveway, and is normally still around the day after. I use the time to clean badges, grills, arches and other places that are hard to get at with the mitt and then get the rest of the gear ready.

straight on with the foam. I find that if I rinse before hand and then spray the foam on it will be gone in about 5 mins. But if I spray it straight on it will cling for around 20 mins giving better cleaning performance

Well that should be a valuable lesson taught to the bawbag. Dinnae mess with the big man

Anyone got a part number for the mondeo drop links as I'll pop into my local ford garage tomorrow and pick some up

does anyone know if the fk ak street coilovers will require shorter drop links, if so which ones are needed?

the philips xtreme vision 100% are quality as well

try permanon. it is basically c1 but rebranded and a lot cheaper, can be used on wheels and paintwork Permanon

i just use the standard shell fuel save diesel with a shot of millers fuel additive in it.