Ambra4

Any one know the location of the reversing light switch on a automatic gearbox

Skoda wheel nut covers http://motors-parts.shop.ebay.co.uk/Vehicle-Parts-Accessories-/131090/i.html?_kw=skoda&_kw=wheel&_kw=nut&_kw=covers&_dmpt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET

If you get a fault light coming on the dash board, you just install LED Lights Load Resistors with the bulb will solve the problem http://cgi.ebay.co.uk/2pcs-Car-Vehicle-LED-Lights-Load-Resistors-6-Ohm-50W-/320659140021?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa8c62db5

By briefly pressing the reset button you can switch over from the trip counter to the kilometre counter. If you hold the reset button for about 1 second, the trip counter is set back to zero. If you hold the reset button for longer than 3 seconds, a display regarding the kilometres still to be driven and the days until the following service interval appears. (The trip counter is not set back) To activate the menu by pressing the rocker switch for about 4 seconds The selected information is displayed after releasing the rocker switch You can select the following information (depending on the equipment installed on the vehicle): MFD VEH STATUS NAVIGATION LANGUAGE DISPLAY OFF Selecting the menu point DISPLAY OFF the display is switched off. Press the rocker switch for more than 1 second to switch the display on again. VEH STATUS flashes in the menu if there is something which is not in proper order on the vehicle (e.g. warning of a low fuel level) After changing to VEH STATUS the first of the warnings is shown and you can then also show other operating states with the rocker switch (e.g. washer fluid level low)