Swamps

So its just a relay?

OK finally had time to really investigate this. What I found - Left hand rear light not working, high level brake light not working. Every other light works as advertised. Theres 12v coming out of the light switch and the plug on the brake pedal. I found a break in point behind the bonnet release catch panel, no voltage at that point, so behind the dash somewhere lies the problem. Put a feed from the light switch direct to that break in point and the rear light works so the rest of the loom is fine. Im assuming its this bulb failure module/relay/fuse, anybody have an idea where it is and what its called, google doesnt bring up any answers

Excellent, thanks. Ill get stripping and have a look. Every other light works fine so I assume its a break somewhere.

Yes, only got 2 volts

Wont that just leave the bulb failure alarm on?

Does anyone know the location of the break point of the rear light loom? Or any common points where it could get damaged?

Thanks for that, just need to work out where the break point is

Ive been dealing with a bulb failure warning for a while, everything was working fine, but now my near side rear side light has stopped working, Everything else works fine. I swapped the bulb holder and the problem persists. Ive tested the voltage and Im getting less that 2v at the plug, compared to 12v on the other side so Ive got a wiring faff somewhere. Can anyone help with a wiring schematic, or better pictures of the loom in the boot? Just need to know where it goes. Cheers