Jump to content

Munces23

New here
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Munces23

  1. I have two problems which I think are linked. Firstly I always leave the radio switched on and it goes off when I remove the ignition key but now for some unknown reason when I turn the ignition back on I have to manually turn the radio back on each time. The other problem is that when I use the GPS to navigate it has stopped showing anythink on the display which is between the rev and speedo dials. Also when I go into the menu on the display there is now no mention of raido or navigation. It always used to show it so you could change the settings. It appears the link between the radio/GPS and the display has broken. Any suggestions please. I have checked all the fuses and they appear OK
  2. Thanks everyone for your responses. I went onto the site, translated it with Google, followed the instructions and now my cruise control is working OK but early days. It's quite easy to prize off the side of the CC stalk with a very small screwdriver and the switch virtually fall out. Unplugged it and then was able to dismantle it. The two small retaining screws have torx heads so if you don't have that type of screwdriver a small watchmakers screwdriver works OK. There is no need to dismantle the on/off switch. I then cleaned all the ponts with Maplins Electrical Solvent Cleaner on a cotton bud. Job done!!
  3. Thanks everyone for your responses. I went onto the site, translated it with Google, followed the instructions and now my cruise control is working OK but early days. It's quite easy to prize off the side of the CC stalk with a very small screwdriver and the switch virtually fall out. Unplugged it and then was able to dismantle it. The two small retaining screws have torx heads so if you don't have that type of screwdriver a small watchmakers screwdriver works OK. There is no need to dismantle the on/off switch. I then cleaned all the ponts with Maplins Electrical Solvent Cleaner on a cotton bud. Job done!!
  4. I have a Skoda Octavia Elegance Estate TLD 2007 and have an intermitant fault with the Cruise Conrol cutting out. I have narrowed it down to it happening more frequently when either the engine has been running for a long time and or the weather is hot. It seems to come back to life when everything cools down. The brake lights work OK. Any thoughts please?
  5. I have a Skoda Octavia Elegance Estate TLD 2007 and have an intermitant fault with the Cruise Conrol cutting out. I have narrowed it down to it only happening when either the engine has been running for a long time and or the weather is hot. It comes back to life normally when everything cools down. The brake lights work OK. Any thoughts please?
  6. I have a Skoda Octavia Elegance Estate TLD 2007 and have an intermitant fault with the Cruise Conrol cutting out. I have narrowed it down to it only happening when either the engine has been running for a long time and or the weather is hot. It comes back to life when everything cools down. The brake lights work OK. Any thoughts please?
  7. I have a Skoda Octavia Elegance Estate TLD 2007 and have an intermitant fault with the Cruise Conrol cutting out. I have narrowed it down to it only happening when either the engine has been running for a long time and or the weather is hot. It comes back to life when everything cools down. The brake lights work OK. Any thoughts please?
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.