qlondonq

Take a look here: http://www.myturbodiesel.com/1000q/multi/rain-sensor-auto-wiper-retrofit-vw.htm Scroll down to the section where it says "mk6 VW Golf, Jetta (2010 and later), and Passat rain light sensor (RLS) installation notes" Or here: http://forums.vwvortex.com/showthread.php?5287722-Adding-Rain-and-Light-Sensor/page4 skip to post #127 If you're only planning on retrofitting the rain and light sensors, than you've only got three wires to worry about; ground, power, and BCM (Pin 33 on the white plug) For Auto Head-lights, you'll need to get a repair wire and run it from the head-light plug to the BCM Its actually a pretty cheap mod. hope this helps

Quick update Was able to change "O-D" to total mileage but it still flashes. Thought it might go away after 50 or 100 kilometer; thought wrong. Had the factory shop run a scan of the car but no error codes Ran the auto-scan myself with VCDS and no error codes either. help???

Now here is the other interesting thing, they have VAG equipment. But because it's in English, they can't quite figure out what the options mean. Im guessing they use the chinese version of VCDS as a supplement to their VAG equipments. The last time i was there, they spent about an hour retrofitting my Maxi-Dot only to realize that have been selecting the wrong option; instead of choosing Instrument (Replace) they chose Instrument. So nobody came across this problem (flashing "O-D") when they got their Maxi-dot retrofitted?

Does anyone know if the Yeti has brake wear sensors installed across all trim levels? or just some of the top trims? I was able to find articles about brake wear sensors for Octavia but couldn't find any for the Yeti. I drive a 2011 Yeti 1.2 TSI that came bone stock; no climatronic, no rain/light sensor (retrofitted), no maxi-dot (retrofitted), and etc.

Thanks George, The factory shops are clueless on how to sort this problem out. Plus, they use Chinese versions of the VCDS; which makes it more confusing. and Im not quite sure if it is the BCM's problem or the instrument's problem. They retrofitted my Yeti's maxi-dot a few months ago with the same problem. I was only able to resolve it after fiddling around with VCDS settings and now i can't remember how. Im hoping that its only a matter of resetting the mileage .

I tried looking for similar topics but nothing came up. Anyways, a friend of mine took his 2011 Fabia 1.2TSI into the factory service shop to get a Maxi-Dot cluster retrofitted. The factory followed the standard procedures of replacing instrument clusters; reset the power steering, ESP, and re-paired the keys with the immobilizer. heres the problem, the odometer won't show the total mileage. Instead, it starts flashing "O-D". Everything else works fine, i can scroll through the menus and make changes. Anyone know how to fix this? I'm not in the UK so i can't contact shark performance. I've tried but they weren't able to help me since I'm in another country.