silky16v
Members
-
Joined
-
Last visited
Solutions
-
silky16v's post in gtb2260 turbo was marked as the answerhttp://www.ebay.co.uk/itm/190900618284?_trksid=p2057872.m2749.l2649&var=490184934737&ssPageName=STRK%3AMEBIDX%3AIT
this fits fine from the TIP to the turbo
-
silky16v's post in Strange after new clutch and dmf was marked as the answerwhen you did the console bushes you will have removed the front arm bolts that go into the alloy console i'd have a good guess these haven't been done up tight enough or the threads have stripped this will cause exactly the issue you describing
my advice is jack each side up of the car until each front wheel is off the ground make sure you steering lock is applied and grab each wheel in the 9 & 3 o'clock position and pull back and forth
get someone to look at the front arm where the bolts goes through and i guess this will be moving (the outta metal subframe must grab the bush to keep it from moving)
if the bolts have stripped the threads from the console you can get away with fitting longer bolts to grab the last remaining threads
give the above a try and let us know how you get on