Barneylita

Nope, they don't offer it! Shouldn't be this hard to get an image onto a plate lol

Hi, I am looking for a way to get a printed image or a selected image transferred onto a china plate, does anybody know a website that does this for a reasonable fee? Thanks in advance.

Hi, it was the s bend pipe coming from the bottom of the turbo which had a hole in it, but not to worry now, iv had a new one fitted all in for 20 quid, so I'm happy . Thanks anyway guys.

Cheers for the replies, I will have a better idea tomorrow when I can get under it and have a proper look as to which pipe it is.

Thanks for the reply, however, the hole isn't in a 90 degree bend, it's in like an s bend shaped silicone/rubber pipe. I will try and get a picture of it tomorrow

Hi, as stated in the title. I have a rather big hole in the S bend type pipe going from what would have been the intercooler going to the turbo (the one near the drive shaft). The hole occurred due to me and a friend putting in a front mount intercooler, but it pushed the pipe back too far and it has been rubbing on the drive shaft over a certain amount of time. Does anybody know of a temp fix for this, and also, what pipe I am actually talking about and what code number/name the pipe is to buy a new one. I would post some pictures but can't really get a camera in there until I get it up on a ramp. Also, could this boost leak have an affect on my car taking a few seconds longer to start every time I start it up? Thanks in advance. Barney.

Well I don't wheel spin or drive like a **** lol. And ye they are chunky but hollow, feel pretty cheap tbh

Ye could be, but it isn't that low to be honest, not as low as some other people's on here

Yes the car is lowered by 3-4cm Good effort at what? Snapping it? Lol. Went to the garage at the end of my road, he's been a mechanic for 30-40years and said he hasn't seen anything like that before, said they usually snap at the cv joints. Has any body seen this happen or had it happen to them before?

Hi, I have a skoda fabia 1.9 tdi 05 plate. I was pulling out of a t junction when my driver side drive shaft snapped on me, coming from the right wheel it has snapped clean, but it looks as though it has been weakening over a long period of time, like rounded at both edges of the snap. Could this be to do with bad tracking ( going to the left)? Also, does anywhere sell a solid drive shaft or a stronger one than what comes with the fabia? I will upload pictures later if it helps but on my phone at the moment. Thanks in advance

Ye seems a lot more hassle than it would be worth to be honest!

Skoda Fabia 1.9 TDI 2005 model

Hi, I'm thinking of fitting a 6 Speed Vrs gear box to my non-vrs fabia. I have tried searching but to no avail. I have a few questions before buying one: 1. Does it matter what engine Vrs it has come from? 2. Will it fit straight into my fabia? 3. Would I need anything else apart from the gearbox to make it fit, e.g. Clutch and Fly-wheel? Thanks in advance.

Will it fit a Skoda Fabia non vrs? 05 plate