Togo

And the fault has come again :wonder: This time the boot light is always a little dimmed and the "Open door warning light" stays on even when all doors and boot lid are closed and locked. When I drive and I press the breaks, the "Open door warning light" goes out and when I release the breaks it goes on again. And when driving, the "Open door warning light" can begin to flicker and every time the "Open door warning light" is on, the boot light is on but dimmed. Some thoughts?

Okay, here is the sell from eBay. You have to ask him about a armrest for a Skoda Roomster.

Yes a can, tomorrow I will find the information for you. I bought it from person on eBay, and not from a company.

It is clearly a matter of tast. I like it a lot, I drive every day on motorway and for me it makes the journey a little more comfortable.

+1 for the 105 bhp 1.2TSI. Came for a Octavia 1.9TDI 105 bhp, I really love the 1.2TSI. Always put a smile on my face :-)

Aha, okay. I misunderstood you question. I do not use seat covers. For my children's I use a dedicated children seat that uses the ISO fix on the back seats. When one of then is in the front seat the children seat follows with them. I then disabled the front airbag.

No problems so far. I can deactivate front airbag with the car key. If one of the kids wants to sit in the front.

Congratulations with the new car :-)

See http://www.briskoda.net/forums/topic/229928-roomster-fixed-towbar-on-car-photos-please/ For a picture of a fixed towbar.

Perhaps a new battery? If the battery has never been changed, it will be around 5 years now.

Congratulations with the Roomster! Mine is the same color, Miami Blue.

August is near :-) My Roomster is from October 2011, and I have not had any issues with heated seats or the seat covers. Got to kids in the age of 3 and 5.

The "Genuine Skoda front and Rear rubber mat set and x4 carpet clips" has my interest. But I need them sent to Denmark.

I must say, that I love the idea about an electric car. Recharging at home cheap and recharge on the go. clever.dk is build infrastructure to support electric cars. They are offering Quick Charge stations that will recharging the battery from 10% to 80% in 20 mins (charging at 135A at 350V) . and then you are ready to travel again. Another operator here in Denmark is "Better Place" that will offer battery replace stations. It should take about 5 mins. BUT the Peugeot Ion if think is an ugly car and it is way to small. There is no boot, just one big battery.

I live in the future, or at least the next 3 months I have been lucky enough to be allowed to borrow an electric car for 3 months that has a big 16kWh battery and no benzine/diesel engine. It is a Peugeot Ion, a small car but very very fun to drive! It has 180nm and a 49kWh electric engine. 180nm makes it really fun to drive. The problem is the range it can cover only around 80 - 120 km (50 - 75 miles). Thanks to clever.dk for let me borrow it. Best regards from the future. - Togo

Good to hear :-)

Can now confirm, that TA volume is remembered if adjusted under a TA broadcast. :-)

On my old car, Octavia from 2006. When the front wiper was on. If I then stop the car, the wipers was set to it lowest interval and when I start to drive again. It returned to it previous setting. Realtor nice feature. Sadly this feature is not in my Roomster.

On my Roomster, I have a problem with one rear window, if it is warm outside > 25 degrees and I open then window. After about 1 or 2 hours, if I then close the window and it is almost close. Then it stops and open all the way. It is like the safety mechanism kicks in a stops the window. If I then close the window in steps, then I am able to close the window.

I am also interested in knowing that. Have you notice that it change the fader direction to the front? Cool :-) and return the fader to it previous setting when traffic announcement is over.

Next is to camouflage the Roomster :-)

Congratulations with the Roomster :-)

Congratulations :-), mine is the same color.

Well it is an easy DIY job. Open the boot lid, use a torx T20 (or was it T15?) undo the 2 torx screws at the light tower/silo. Take the light silo out, disconnect the electronic. The two positions lights is the first to wires. No other needs to be undone.

There is 2 position light at each side. Then there is total of 3 break lights, one on each side and one the middle. Position lights has nothing to do with break lights. Position / Side lights uses W5W bulbs, where a break light on the two sides is a P21 (can remember the type)