-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Everything posted by mick71
-
**** sorry , I'll try n get other pict this weekend , 2nd pict any good ?
-
-
I'm gonna put a couple of Picts up , had car on ramp earlier , not sure how to load Picts
-
So I take it there are 2 different sensors for it
-
So the power steering wouldn't work then
-
do you need an adapter for it then
-
see if that's the problem how do u go about fixing that , funny feeling that's my issue too
-
cheers mate , I'll have a good look at weeken , car bleeding me dry just now
-
underneath the battery , u can get to it behind wheel arch
-
u on about contacts under the car mate at base of steering colum
-
Ur screen shot is same but it all blank n get a wee box in middle saying can't connect
-
It just fails to connect altogether when in steering angle section
-
tried both
-
Get same screen but won't connect
-
Aye mate , connected to steering pump section (no fault codes) just won't connect when u click on angle sensor tab
-
Got a new steering rack fitted to 53 plate vrs , now got occasionally heavy steering especially when parking . Vag com can't connect to the sub section for angle sensor which I think it the culprit , if steering angle sensor won't connect to vag com is it goosed ?also can someone point me in the direction of one that won't break the bank , thanks
-
Wondering if when pipe came of behind boot trim connectors got damp
-
Bump
-
Quick one guys , see when u push stalk forward to wash rear windows does wiper keep wiping continuously till u let go the stalk ? Asking as I had to reattach hose in boot lid and my rear wash only wipes intermittently if I'm holding it in wash position and I'm sure it's meant to keep going till I let go stalk
-
It was second hand vrs springs that had been of a vrs for a few months ( got them in here )
-
I put my 53 plate vrs back on standard springs and was wondering if they take time to settle , i was parked next to another vrs on standard springs and mine looked a good bit higher
-
It's going in later to get all checked underneath (including subframe bushes ) and 4 wheel alignment. Hopefully get to bottom of this , scared to take kids n wife in car
-
It is low like , but it handled great till after new wishbones were put on , but it is the correct ones