Jump to content

andyrno1

New here
  • Posts

    9
  • Joined

  • Last visited

Everything posted by andyrno1

  1. I had a ck3100 on my last 58 plate octavia and a bury on my 12 plate and they both tolerated the control panel going top middle above the stereo and just below the hazard switch with the cable passing under the stereo surround trim. The control unit sits behind the ashtray area to the side. Power and earth off the stereo and ignition live is off the heater control loom or rear of the head lamp switch on all models. Run the microphone out from the glasses pocket overhead(plastic clips lock out on the sides with glasses flap open) and not the interior light assembly as that has sharp edges. Would suggest you use a populated sot lead rather than direct input on the rear of the stereo as you can Get bad echo for the person on the other end of your call on these stereos or a single seperate speaker doesn't have that problem at all. Good luck. Andy.
  2. Thanks buddy,your information and the help of vRS Carl and his knowledge/vcds has sorted all my issues and given me more functionality than I first thought about! Thank you, Andy.
  3. Anybody else with information regarding my lights staying on in the day after ticking the Assistance lights/CH/LH automatic ticked with pin 2 light switch connected to pin 20 module and auto light switch fitted? Have one error message and no auto action. Anybody else had and sorted this on a face lift model?
  4. Had revo on a Audi TT and it was fantastic. Made it the car it should of been when it left the factory! Andy.
  5. 5 so far. Don't think it's been great for the dealers so far. Andy.
  6. Thanks for the reply. My mate has managed to turn on cornering lights,rain closing and get rid of my lock/unlock chirps but no auto lights yet or ch/Lh lights as its saying a fault is seen so we are going to look at it again in a few days. When you select auto lights it puts the lights on in bright daylight straight away. The first bits I mention are all working ok. Also he noticed auto mirror tilt in reverse gear which he ticked and hasn't worked but he was thinking he may need to look at the door module which we didn't have time for today. Any ideals anybody?
  7. Hi all, I have a 2012 octavia elegance which I have inserted the wire from pin 2 to pin 20 as per Fl instructions and I'm picking up the auto headlight switch later today. Does anybody know the exacts of where I go to program auto lights/Ch and Lh and window auto close (rain sensor control) on this Fl model ? Thanks, Andy.
  8. Hello all, I'm Andy and have had 2 octavia elegance estates so far and decided to join as you have loads of great information on here! From an auto electrical/aftermarket background I hope I can feed something back to chip in! : )
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.