haithem1976

I can flasher the three files with Vag can pro VCP ( i can send the 69 curve with VCP)?

what is the new in this last firmware 3501? any change in steering after switching from update 3201 to 3501? For the mke it is obligatorily necessary the soft 3501, it is run under soft3201?

Thank you langers2k , is this obliged to do the 1 file lh0023305.sgo to flash my module? Or the following order is required: 1 lh0023305.sgo 2 lh0013501.sgo 3 Skoda_Oct_RS.sgo Or it is possible to directly make the 2nd file lh0013501.sgo then the steering curves Skoda_Oct_RS.sgo? Is there a change after switching from update 3201 to 35? After flashing, how to clear the faults of module 44? Please in detail since I am interested in flashing my module 44 and are there any faults in module Address 03: ABS brakes (J104)? Have you tried the Skoda_Oct_RS.sgo curve? It is better than 69? Thank you

https://www.drive2.ru/l/9221925/

it is possible to upgrade : Adresse 44: Direction assistée Labels: 1Kx-909-14x-44.clb No. pièce: 1K0 909 144 M Pièce: EPS_ZFLS Kl. 69 3201 Révision: 00H20000 No. Atelier: WSC 73430 790 00088 VCID: 3467EA3957431CBE401-8061 by the soft : 1K0909144R soft 3501 Is there that already tried this update ? the new firmware in below : lh0013501.sgo Skoda_Oct_RS.sgo lh0023305.sgo

Hello I recently fitted a reverse camera, front ops and PLA2.0 to my Octavia 2011, all need some help my problem is : When I press on the front activation ops switch P nothing appears on my colombus "the switch P lights up, colombus remains black only the time display", when going in reverse gear "my colombus displays the ops Front and rear 100%; What is the problem? I changed several firmware on my colombus nothing changed! you can see this : https://servimg.com/view/18979251/3 https://servimg.com/view/18979251/4 Type chassis: 1Z (7N0) Scanner: 01 03 08 09 10 15 16 17 19 25 37 42 44 46 52 55 56 62 6C 72 77 VIN: TMBBN21Z8C2008021 01-Moteur -- Etat: OK 0000 03-Freins ABS -- Etat: OK 0000 04-Angle de direction -- Etat: OK 0000 08-Climatronic -- Etat: OK 0000 09-Centrale Elec. -- Etat: OK 0000 10-Assistance stationnt -- Etat: OK 0000 15-Airbags -- Etat: OK 0000 16-Volant multifonct. -- Etat: OK 0000 17-Instruments -- Etat: OK 0000 19-Gateway CAN -- Etat: OK 0000 25-Anti-démarrage -- Etat: OK 0000 37-Navigation -- Etat: OK 0000 42-Porte conducteur -- Etat: OK 0000 44-Direction assistée -- Etat: OK 0000 46-Module confort -- Etat: OK 0000 52-Porte passager -- Etat: OK 0000 55-Portée des feux -- Etat: OK 0000 56-Radio -- Etat: OK 0000 62-Porte AR gauche -- Etat: OK 0000 6C-Caméra recul -- Etat: OK 0000 72-Porte AR droite -- Etat: OK 0000 77-Téléphone -- Etat: OK 0000 Adresse 10: Assistance stationnt (J791) Labels: 3AA-919-475.clb No. pièce Log: 3AA 919 475 S Mat: 4H0 919 475 E Pièce: PARKHILFE PLA H06 0043 Révision: -------- No. de série: 56261214701838 Codage: 348001 No. Atelier: WSC 00046 123 12345 Jeu de données ASAM: EV_EPHVA2C000000000 002014 ROD: EV_EPHVA2C000000000_SE36.rod VCID: 4B9591C5E2BD634631B-801E Aucun code défaut trouvé no error. Adresse 37: Navigation (J0506) Labels: 1T0-035-680.clb No. pièce Log: 3T0 035 680 G Mat: 3T0 035 680 A Pièce: RNS-MID H42 5274 Révision: AB001001 No. de série: SKZ6Z7L4022016 Codage: 0C0004020101008D002A No. Atelier: WSC 12345 123 12345 VCID: 3467EA3997431CBE401-8061 Sous-système 1 - No. pièce: 3T0 051 859 AL Pièce: EU West V13 8348 Aucun code défaut trouvé no error. Adresse 6C: Caméra recul Labels: 5N0-907-441.clb No. pièce Log: 7N0 907 441 Mat: 7N0 907 441 Pièce: J772__Rearview 0020 Révision: 00H11000 No. de série: 525 PA8J340062 Codage: 0000011 No. Atelier: WSC 98765 666 123456 VCID: EED3B851F9EFF66EF65-80BB Aucun code défaut trouvé no error. I changed my Columbus by another 3T0 035 680 k without mounted the reverse camera ;the same problem Only the beep and no OPS display and after I mounted the camera record nothing changed and the surprise I mounted another type RCD 510 without camera and I press on the front activation switch P Is ok very well "sound and display ops", is the OPS installation for a Columbus different from an RCD510 since rcd510 ok RNS510 no display?what is the problem thanks

thanks Eddie

thanks , but Is there a difference between 1Z0 920 843 S and 1Z0 920 843 Q moduls?how the last?

i have a skoda octavia 2011 2.0 TDI cr 81kw, Is it possible to upgrade the software for the maxidot cluster 17, the part number 1Z0 920 843 S Mat: 1Z0 920 843S Room: KOMBI H04 0607 By 1Z0 920 843Q soft 0608 my scan vcds Adresse 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb No. pièce Log: 1Z0 920 843 S Mat: 1Z0 920 843 S Pièce: KOMBI H04 0607 No. de série: 00000000000000 Codage: 110E01 No. Atelier: WSC 73430 031 00088 Jeu de données ASAM: EV_Kombi_UDS_VDD_RM09 A04114 ROD: EV_Kombi_UDS_VDD_RM09_SE36.rod VCID: 489FAEC9F3CB885E1C9-801D FL_1Z0920843Q__0608_S.frf