Jump to content

kevinjwiles

Members
  • Posts

    240
  • Joined

  • Last visited

Everything posted by kevinjwiles

  1. As above I know a lot of people have had there seats re-done can anyone tell me by who?
  2. Full service history, Cambelt, Water pump being done as well!
  3. Sure see here http://www.facebook.com/media/set/?set=a.10151562391723322.1073741828.826608321&type=1
  4. Ok So I am looking for a hot hatch ideally, open to other ideas. Needs to be fairly quick ideally I want buckets or sport recling seats, Ideally it needs to be a bit special
  5. As above I have £4,000 what would you buy?
  6. I am gauging interest in my 2004 Skoda VRS 1.9 TDI Mileage sits on 91,000 but will go up as using daily Contact Kevin @ 07824 69 79 65 Car located in Stratford Upon Avon The body work of the car has some blemishes but is in good condition for its age, the interior is in almost mint condition. Factory Fitted Stuff Factory fit cruise, Seat airbags, Airbag off switch and ESP. (All options) Cruise Control The car has being remapped and is running around 183bhp this was done by the last but one owner. Before I bought the car last year from GRR666 on here it has the below fitted and changed fitted sport shocks and springs (-25mm only) Very worthwhile 312mm bigger brake upgrade. Cambelt/waterpump done about 4000 miles ago. Also had a new clutch and dmf The car also has a stainless steel blueflame exhaust which is very quiet & A1 condition alloys which have being refurbed last year. Previous owner and myself have spared no expense on this car with GRR666 having 100’s of topics on the forum about bits and bobs The below are added extras which the car comes with Remap, 312mm bigger brakes upgrade. Sport shocks and springs. VAG Sharkfin aerial, Blueflame cat back exhaust. Upgraded x style console bushes. (The standard ones on these don't last 5 mins.) Refurbed wheels. Interior Lights VRS Pedal Plate Pressed Number Plates (Have originals as well) HIDS The car has being serviced on time every time and never misses a beat, I am only selling as doing a lot less miles now so not needed as much. The car also comes with a private plate which is “VR51 FLY”
  7. Right So I want to take out my front seats, Question 1: Which four bolts am I Removing? The ones holding the runners which are the star ones or the four normal bolts which are harder to get to?
  8. Hey I am wondering would his have an effect on fuel? Since I've had it fitted tube fabia is going through 70fuel a week instead of 30
  9. Bit too common everyone has one :(
  10. Yo So I have split with my mrs and might look into changing my car I was wondering what suggestions people had? I am 23 I have always wanted a DC5 but bit over budget. I want something with a bit of poke but looks nice as well suggestions welcome
  11. Hey So I came back tonight, I left car in one spot went to move it and noticed a big oil leak. I checker the underneath of my car and the tray is caked in oil, any ideas where the leak could be from?
  12. What do I need to remove the plastic casing to attach the pedal cover?
  13. hahah My kit has wiring to it as well and someone mentioned drilling
  14. Paintless Dent Removal tool with 2 Adhesive attachments, this tool has never being used. This auction is the for the below dent tools · Dell lifter slide hammer · + 2 ADHESIVE ADAPTER This tool allows you to remove dents from around your car without the need to paint after. They have small dents or bumps on the car? Remove them yourself! This is so simple and reliable: The adhesive adapter in the right size provided with the hot glue and the Delle setzen.Den Zughammer hook and pull out the dent with a few simple steps! The glue is then easily removed with a plastic spatula. Your car can look like new - in less than 30 minutes. No expensive repair bills! Completely made of STAINLESS STEEL Fits all standard tension adapter (Würth Förch, Bernese ... etc.) Suitable for all dents without paint damage. Self-repair and save money! £90
  15. Paintless Dent Removal tool with 2 Adhesive attachments, this tool has never being used. This auction is the for the below dent tools · Dell lifter slide hammer · + 2 ADHESIVE ADAPTER This tool allows you to remove dents from around your car without the need to paint after. They have small dents or bumps on the car? Remove them yourself! This is so simple and reliable: The adhesive adapter in the right size provided with the hot glue and the Delle setzen.Den Zughammer hook and pull out the dent with a few simple steps! The glue is then easily removed with a plastic spatula. Your car can look like new - in less than 30 minutes. No expensive repair bills! Completely made of STAINLESS STEEL Fits all standard tension adapter (Würth Förch, Bernese ... etc.) Suitable for all dents without paint damage. Self-repair and save money! £90
  16. Drill That sounds dangerous I work in an office
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.