greengoddess69

I fitted the direnza one that's similar too the Toyo one no problems found since fitting it oh and make sure you allow a full weekend if it's your first time fitting one

Ok so I got the down pipe and decat fitted not enough room to fit the cutout so I've got some three inch pipe on order so I can remove the the middle box and hopefully get it to fit somewhere around there no problems yet with the eml coming on so all good at the moment

Having had the car now for 8 months I've started to do abit of modding.Having already fitted a fmic and a ramair panel filter I've now got ahold of a decat.Im also looking at fitting a electric exhaust cutout inbetween the down pipe and the decat pipe will I need to do anything else other than to have it remapped.Anyone got anymore advice or input good or bad thanks.

Hi there what state is the bonnet in could you send me some pics of any marks and how much please

You might be better off getting one made by a specialist they sometimes work out cheaper and you can customise the tail piece to how you want it to look tony banks in Leeds are quite a good company from what I've been reading online but if it's too far from you then have a look on internet or ask around when my standard one goes this is my plan good look and don't forget pics or even a video

Finally got it put back together this evening wish I could of got the pipes hidden but never mind just need to add some mesh

So today I striped the front bumper and wing off after someone decided to cut me up the other week so while the bumper is off thought it a good idea to fit a fmic oh my good how I wish I had hindsight not something i could of done by my self so glad I had octymad16 to help me run out of daylight as we didn't start till early afternoon here's a few pics that I took in the dark

I'm having the same problem get someone with vcds to run diagnostic mine came up with the ac pressure switch it's located on the bulkhead between the brake servo and turbo behind a heat shield haven't got round to getting one yet to change mine but I've been told it has a valve to stop you loosing any gas oh btw this is on my mk1 petrol don't know if it's different on your diesel hope this helps

I've been looking at the ones on http://www.venommotorsport.com/suspension/jom/strut-braces/skoda-octavia-1u/

Ive just dropped the oil as it was black.Had to buy a oil filter tool to remove the old one as whoever put it on must have arms like popeye when he's had his spinage.Fitted a new ramair filter that I got from vag tuner last week new plugs that's it for now.

Shame you don't have a local breakers near you.As you could have bought just the black pipe that is if you only needed that one.Bloody robbers these car company's for something that probably only cost £6 to make.

Where not on a stand just going for a mooch round that's if you was referring too us lol

You know what they say bigger is better lol

Me and octymad16 are going so hope to meet a few of you at the stand please be gent all its our first time