M11UKR

Hi to all I have over 90 different cars in my life but never had something like happen today with my Octavia 1.6 tdi, mileage high, yes. I was on the way to Norwich from London and on half way up I have oil pressure light on, it made a three times beep and 5 times flash and gone till next time. The car was servicing just a hundred miles ago, all fresh, right level, right oil etc. On the way back twice happen like light on+three beep+permanent flushing till I just switch ignition on/off and even did not stop. Get home run to shopping and its not appear anymore. Any idea? thanks

Bought second hand parts, job done Thanks for all reply

My Lord, I do that on the ground, no rump. Is that housing hard to remove?

Hi to all Want to take off the front wishbone to replace the bush, bolt snapped. Was trying to cut the bolt by grinder to take the wishbone out but no luck cos tight space

Looks low enough for me. My ex VRS was sitting on PI springs fitted by first owner. Regret that I sold her very much

Thank you. Want to see the pictures

Everyone say the same think, don't put it on. So I contacted Vogtland distributor and drill their brains as well, they found a right application for my car but now the price push me to think,what is best to buy, Eibach or Vogtland

Everyone say the same think, don't put it on. So I conacted Vogtland distributor and drill the brain there as well, they found a right application for my car but now the price push me to think what is best to buy, Eibach or Vogtland

My body weight is 72kg, when i get under the bonnet the car sit only for a few mm down, so logically 30kg difference in engines weight it suppost to be nothing for the springs, Am I right?

The adver clearly shows that springs fit 1.6tdi

http://www.ebay.co.uk/itm/252215190984

My appologize I got Vogtland springs -35mm with 1020kg front but I cant find the information how low the car to be on them. Eibach got my friend to sell but -30mm on stock shocks seems to be not low enough. I know, better ride, good quality etc but still not low enough.

Hi I have the springs with up to 1020kg max.axle load.(front) My car got 1050kg, Can I put this springs on if the weight difference only 30kg? Thanks

Both ways but warm up for a few min appreciated to the car.hahaha

Both ways but warm up for a few min appreciated to the car.

50mm to much. Will feel a dust under your bum. Not suit for original shocks as well. Put 35mm, it would be good as VRS lowered from the factory for about 20mm. Google it and learn about the springs suit to your max.axle weight etc

Hi Need to replace two very soon so want to ask if worth to buy aftermarket ones? Dealer price 86 quid each! Thanks

All seats are the same. Front door cards are the same. Rear door cards are different. Upper plastic trim is longer in estate. Can be sorted by plasic welding job.i done it to my car as enterior comes from hetch to estate.

What rear rated? My estate is 1150 max

Thank you for the help. My front axle load 1050 as yours so the springs won't drop it properly. Sad ????

I bought the VRS black leather seats, cards, middle arm rest from here for £290 collected. The set was for sale for long time and start from 500, thats the real price from FL model. They are heated also but my car has no option to connect it but who care... If you want to find you are always find... Seats from VRS are the best. Good luck

The sticker gone but thank you anyway. Will call to Skoda to find out

Where can I find the axle load, ring to the dealer? Was looking everywhere...

My elegance got standart suspension. I had vrs which sold with lovering springs, elegance was on the ramp with shocks off and I decide to put vrs springs on and got no lower car but firm on bend and no bounce on the bumps....

I read many topics that said the some makes don't lower the car as it should. Like you buy 50mm and got only 20-25mm down Can you advise any propa application to lower 1.6tdi manual gearbox please. On Ebay some descriptions show the springs can lower the car with 1.6tdi, 1.8 and 2.0Vrs models which is lie because 1.6 engine and 2.0 VRS got different max axle load and when I ask the sellers about it they can't explane and don't accept return oncea springs fitted but don't lower the car..... I have VRS front springs on my car, they didn't lower it on even one mm Thanks