hey guys wondering if you can help me out here.....

bad tempered today - work reasons hahaha

went into the car and pulled the door handle inside the car cause i didnt close the door right and heard a click and it came very loose.....

anyone know if the handles are connected by simple cables or electics? and if the case easy enough to get the door cards off?

cheers in advanced

Took the door cards off one saturday night when passenger window dropped, 55 reg had cables on the inside of the car, took my cousin about 10 minutes to get door card off literally unscrew and pull

hope that helps

It's a cable. Door cards come off fairly easily, from memory:

3 Torx T20s across the bottom of the doorcard

Lever the window switch panel upwards

Grab handle slides towards the front of the car

Once they're off, there's three big phillips head screws

Once they're off, the doorcard just pull away from the door (may need to pull quite hard

Then to remove them totally, they lift up from the lip where the window is

Once you're that far, it'll probably just be a case of slotting the "T" on the end of the door release cable back into the handle, and making sure the cable sleeve is correctly slotted into the guide on the back of the door card. Then reverse of the above to refit (drop into the window lip, push onto door to clip back, 3 big screws and 3 T20s and then the grab handle and window switch panel)