Hi all,

I need to remove both rear parcel shelf supports in my VRS hatch to do some electrical work. Has anybody done this?, I had a quick look last night and it appears they are held on by 2 steel nuts and a 3rd plastic one at the far end. Are there any hidden fixings or clips/techniques to avoid breaking it when removing them?.

Many thanks

Phil

just be careful phil, they should come out without issue.

will have a look for the tow eye thing for you btw!

If it is a mark one I have just done mine there are two pop off ones where the seat and there is a Phillips drew driver near them there are three in the boot area and then the bolt that goes through the seat belt

Thanks guys, and cheers Luca.