Hello guys, I bought O3 5E which was crashed on front. It was repair by some specialists, and somebody change lights from xenon (by VIN number,they should be original)  We tried to connect xenon headlights and rework the conectors. I dont know why but can bus wires were missing. Other thing was level sensors arent there. Car came with halogen lights installed, but there are some malfuncition with them... cannot use high beam - it says bulbs are bad, and nothing changes inside connector - no voltage appears.  Other thing is that warning lights doesnt work. nothing happens. (central electrics says codding problem)

Could somebody send here what should i code to make it work with vcds.

thank you for your help.

Maybe start by posting an full autoscan and an adaptation map from 09...

This is coding in 9 central electric

Please install the latest English VCDS version from here: https://www.ross-tech.com/vcds/download/current.php

 

It can be installed at the same time as the Czech version you currently have.

 

Then post a full autoscan and an adaption map from 09. The picture you've taken will not help