kerma tdi i've been on there website and im not car minded.

I was wondering which injectors should you buy for a 1.9tdi fab vRS and what gains should you see?? also the spec clutch on there is this suitable for the fabia?

Does anyone know how much shipping would be for these??

all help appreciated

Current engine spec-turbo dynamics stage2-seat sport front mount-bmc air filter-turbo back miltek exhaust-allard egr pipe

What over all power could i see by fitting these? rrealistic figures only please

thanks mike

I'm looking into R783 nozzles , but not sure where to get them from. A pd130 in europe is doing 290bhp with these nozzles and no other additives. (obviously big turbo etc like we both have)

so do i only need nozzles not full injectors?

Yes - the injectors will be the same - It's just the ends where the fuel comes out that is altered - Not sure what R783 stands for. Probably R = race or 783 = 0.783mm aperture? Not sure. This is why I've kept hold of a spare set of pd130 injectors so I can send them away, get the nozzles swapped and balanced by someone what knows what they're doing, then get them sent back to me complete - Then Allard will fit them along with my flowed head and inlet manifold, and go for another remap.

Dear god, is this the new face of the space race?

I'm not thinking about rockets just yet. :P

I'm not thinking about rockets just yet. :P

Why not mate? You're only about 2 steps away from the mongrel looking like this:

so is the sach kit on kerma suitable for a fabia? i dont really want to phone america

Suggest you get as much advice/ parts from the UK as far as possible.

That way you're covered that the parts work, are under warranty, etc.

Just my 2p worth....