Ghost2255
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by Ghost2255
-
-
In up! everything is the same.
-
I have just ordered the Up moulding that goes on the front of the rear wheel arches. Hopefully this will allow the rear liners to bolt on?
The part numbers are 1S0 810 987 1S0 (LHS) and 1S0 810 988 1S0 (RHS) £3.65 + vat each.
will let you know if it works when I get them.
photo please
-
You do not need as many screws etc as it states (not on the citigo)
I cannot get this is attach maybe the UP rear bumper is different??
You must change this part in bumper for another one attached to liners kit. And then replace plastic screw for metal one with torx head.
-
I haven't got rear mud flaps
-
I will be interested to know if these cut down the noise of spray in the rear wheel arches in the wet,
Yes, it is
-
In my original post I had doubled the quantities. However it looks like I need to order more although you have not mentioned using the 4 x Expanding nut 5 x 13,2 N 106 213 01?
Because you need 8pcs just like you wrote
-
Whilst trawling through the Seat/VW UP forums for coding help I came across a reference to the UP having rear wheel arch liners. Searching on ETKA I found the following parts to fit the liners (2012-2014 models the same).
However I am not sure if they would fit a Citigo but would think there could not be much difference? The cost was put at around 60 Euros?
1 x Wheel housing liner plastic left rear 1S0 810 971
1 x Wheel housing liner plastic right rear 1S0 810 972
8 x Expanding nut 5 x 13,2 N 106 213 01
12 x Expanding nut 4,8 N 908 338 01
36 x Hex soc head panel bolt N 909 747 01
8 x Insert Nut 811 807 577 C
Quantities are to do both sides of the car
12 x Expanding nut 4,8 N 908 338 01 (I used only 10)
8 x Insert Nut 811 807 577 C (I used only 4)
36 x Hex soc head panel bolt N 909 747 01 (I used only 12)
Maybe I did something wrong, but everything looks OK and there is no more empty hole to use any more bolts.
-
Battery in my cel phone died when I started working, thats why there is no photos.
The most difficult is to find first hole, then you will know whot you are looking for.
-
This polish guy its me.
I've just mounted wheel arch liners in my up!
You don't need to drill any holes they alredy in the body. The only thing is find them. Factory hiding it behind small stickers an painted.
-
It depends what you expect from car.
ASG gear changes are much slowler than DSG. In some situations gearbox "thinking" before change gear.
However I would never change my up! ASG for manual. Comfort of auto box is very important for me.
You should make a test drive before decide to by or not. Not everybody is satisfied with this AT.
-
I have a VWup! ASG and I have hill holder. It stops a car for few seconds before rolling back. I didnt check if if works fo prevent rolling forward.
Sorry for my bad english.
That piece of sponge?
in Škoda Citigo
Posted
I found it about year ago.
It is very good way to start corrossion in that place. In my up! I made a little modification on it. I wrapped it with aluminium tape and then black vinyl.
Now its waterproof and no moisture there and looks like original black foam.