Jump to content

Red rover

Members
  • Posts

    26
  • Joined

  • Last visited

Posts posted by Red rover

  1. Hi i have a red monte carlo estate and am looking for a protector for the rear bumper as have a dog that get in the boot and dont want to scratch the paint looking on superskoda they do a gloss black one has anyone used these and if so do they mark easily? Thanks

  2. If its blown again and your bulbs are ok I'd say you have a wire'ing issue prob best taking it 2the garage if your unsure what your doing easy way 2 check which side is take 1bulb out replace fuse does the other side come on? Then vise versa narrows it down to which side fault is on and always make sure keys out of ignition when fitting bulbs or fuses as I found out when putting led bulbs in the drl's lol

  3. Bulb shouldn't blow fuse do you have standard bulbs fitted? Have you flicked the switch across after changing fuse? Has new fuse blown? And no need 2 skin nuckles pull trim of push tab in and light pops out simples lol

  4. U shouldn't solder into any thing really they don't like it as it increases the resistance the way I did it was remove 2pin plug from bulb holder remove pink clip use pin out tool and push pins out of holder can b a little tight but they go then swop pins round refit pink clip and that's it 5mins per bulb max and no cutting or soldering required if u really wnt to cut ur wires use spade terminals as can be returned to standard no problem ??

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.