cipt2001

I purchased and installed a 3rd party Carplay screen and I am quite happy with it, with the only issue being finding the right fuse to use for it. The problem is actually coming from the S&S system, when using a fuse from the 29-37 range (ignition on only) the Carplay screen will restart after the engine is restarted as there is no crank protection. I can't use a live fuse because that will drain the battery, but is there a fuse that offers a crank-protected ignition on connection, or even a live connection with a short timeout after removing the key from ignition. I was hoping that the fuse 50 used for the infotainment system will offer such a short timeout, but that might not be the case and the infotainment is shutting down by itself, with a longer timeout which will not be helpful in my case. Any ideas on how to connect this without being impacted by S&S are welcome.

You need at least the following parts: - rear axle sensor for automatic leveling - lights control module - different connectors for the lights - quite some connections added to put everything in place More details here (if you already have the facelift variant you need less work that is presented there): https://wirer.sk/f3_bi-led/2/

I believe this guide should be able to help you: Heated front seats – wirer

AFAIK Bolero does not have navigation so you must be using CarPlay or Android Auto for that, and VC will only display the native navi, not the ones coming from the phone.