[Coolant warning light, fuel gauge drops, fuse issue?]

Thanks will be looking at it this weekend:)

[Coolant warning light, fuel gauge drops, fuse issue?]

Brilliant thanks

[Coolant warning light, fuel gauge drops, fuse issue?]

Hi folks, my dad has a problem on his fabia, 52 plate. Gets coolant warning and beep and fuel gauge drops to nothing and the trip button doesn't work. When you give the fuse cover a whack things seem ok. All fluid levels are fine and fuses seem ok too. Any ideas?

[Dim skoda roomster headlights - what best to do?]

Am confused as to how many of the HID sellers state that they are sold for shows and off road use only - suggesting they are not uk road legal??

[Dim skoda roomster headlights - what best to do?]

Had no idea it might be a mechanical problem!

[Dim skoda roomster headlights - what best to do?]

could well be, i didn't know it was just mechanical!

[Dim skoda roomster headlights - what best to do?]

Thanks and that would be a very kind offer if I wasn't so far North! have to say, having looked at the kit, looks a bit daunting when you see wiring! wouldn't bother me on my old van but a modern car is a different matter. Wishing it was just replacing the bulb really! :(

[Dim skoda roomster headlights - what best to do?]

yes, visible round lens and no, just one bulb

[Dim skoda roomster headlights - what best to do?]

Thanks, how do you tell if they are reflector or projector?

[Dim skoda roomster headlights - what best to do?]

Hi folks, am struggling with my headlights. Have an 07 roomster 3 and doing minimum of 60 miles a day on rural roads. The dipped beam is acceptable (just) but the main beam seems little different to the dipped, doesn't light up much, not much higher, is slightly to one side and patchy in light. When looking at the bulbs head on it looks fine but not when driving. Replaced the bulbs a few months ago (with just standard bulbs) but no difference again. My wife's Toyota urbancruiser lights up so much more and even our old campervan lights up nearly to Jupiter with the front spots!

 

Have seen posts on Osram and Philips bulbs but don't want to spend more if the headlights seem just the same. It keeps passing MOT's and services flag up nothing. I would happily upgrade if it meant an improvement and maybe also replace the front fogs - how easy is it to get in to the front fog bulbs?

 

Just as an aside, I had major problems getting into to change the sidelight bulbs but for anyone trying, who values the skin on their hands lol, a strong thin crocodile clip was perfect to get into the stupid useless metal housing around the bulb holder - grip the holder, twist and remove, wish I had known about that tip at the start, would have saved hours of trying!

 

Thanks in advance of some help

[Windscreen Wiper problem]

Hi, I had same problem, linkage broken. Got someone to drill it out and bolt it instead which lasted a couple of days before nut fell off! but I took apart again and re-bolted with normal nut and nyloc. Fairly easy to get to, take caps and nuts off wipers - might have to put a cloth or clamp on arms and tap with a hammer, mine were on solid, then take rubber strip off and two nuts off the tray under the bonnet that fits under the windscreen, carefully draw it forward and past the bonnet (washer tubes still attached) and you will see the broken linkage. Apparently you need to replace the whole linkage and motor as things don't come apart easily so definitely worth drilling the fixing out or getting someone to and bolting securely with a little bit of play between the first nut and the lower nyloc. I have used about a 10 - 12mm bolt about 40 - 50mm long. There is just enough room to get a socket on the top of the bolt and an adjustable on the nuts

[electric windows - what left to try? does it have relay? thermal fuse?]

Strange, came home tonight and neither window works but then noticed the drivers side is down about half an inch!

[electric windows - what left to try? does it have relay? thermal fuse?]

ok, some form of progress lol, sprayed everything I could easily get to with contact cleaner tonight including the fuses and took the battery off for half an hour. Still nothing though window switches still light up. Then, noticed I had left interior light on, went to passenger door and just for the hell of it tried that switch and IT WORKED! then didn't later :(

Took drivers switch back out and apart and noticed quite a lot of moisture on the printed circuit and rubber pad, dabbed these dry and sprayed with contact cleaner. Am I getting any closer? lol, had nothing previously for 3 weeks!

[electric windows - what left to try? does it have relay? thermal fuse?]

ok, will try that tomorrow evening and leave it off for about 10 minutes? see if it resets anything

[electric windows - what left to try? does it have relay? thermal fuse?]

is it enough to just take the earth off? when I changed the battery the radio was fine before. Could this reset things if there is no fault in the window circuit?

[electric windows - what left to try? does it have relay? thermal fuse?]

phew! that is quite a list, have 14 watchers on ebay so may not be necessary in the end but would have liked to have sorted them.

I have changed the battery recently but the windows worked after it was changed. No other units have been changed as I have had the car since new. Would it be ok to disconnect the battery to reboot? for how long? and can this affect other things?

[electric windows - what left to try? does it have relay? thermal fuse?]

Also, am I right in thinking that it is unlikely to be the convenience unit as the central locking works fine (apart from the key won't turn in the door even trying graphite powder, though that's probably gone solid through lack of use) the interior lights, 12v socket, alarm all work fine too.

[electric windows - what left to try? does it have relay? thermal fuse?]

thanks, good to know the wires go to the motor first. Really hoping there is some signs of fraying or a split as don't fancy taking the door panel off as I really just need to sell the vehicle soon. Still be interesting to know if there is a thermal fuse and if it has a manual reset after all the rain that got in

[electric windows - what left to try? does it have relay? thermal fuse?]

Hi, nothing seems loose, also seems really awkward to get the rubber boot off to get the connectors out, presumably if I can check for power at the switch end that would mean having to cut the cable tie and removing the inner black connector as my multimeter seems too big to check the contacts on the light brown plug? is that a good start. Really wish I could have a wiring diagram to work through things, or just click my fingers and everything would be ok . Is so annoying when I get 13 months MOT on the car to sell then the windows stop working :(

[electric windows - what left to try? does it have relay? thermal fuse?]

What else does the comfort system control? if it helps, the central locking still works and the alarm when triggered off the fob. Yes, neither of the windows work at all

[electric windows - what left to try? does it have relay? thermal fuse?]

Hi, so does that mean it wouldn't have a relay? would the thermal fuse have a manual reset button on it? am starting to think rain getting in could have triggered that but I can't face taking the whole door apart. Anyone got any pics of where it is on the motor if it might have a manual reset?

[electric windows - what left to try? does it have relay? thermal fuse?]

Hi all, still no luck with my electric windows in 55 plate 1.2 fabia. Have put it on ebay but might have one last try. Have seen so many conflicting things online as to whether or not there is a relay or relays for the windows or whether there is a thermal fuse at the motor instead? any help would be appreciated as neither of the 2 switches i have work at all (the lock / unlock buttons still work) no wires seem loose either and the window fuses seem ok but nothing moves at all and i can't try it with the door key as that no longer turns either! the key fob windows function mustn't work in my model so kind of stuck.........:(

[Fabia electric windows not working - at end of tether!]

Thanks, think i'm fed up messing with it, just put it back on ebay with windows not working :(

[Fabia electric windows not working - at end of tether!]

doesn't work for me on fabia or roomster, must be only certain spec

[removing interior door panel?]

Hi, still at a dead end with getting my windows working, next step is to investigate the motor and connections, any ideas on how easily to remove the door panel? last thing I want to do is break anything...............