Nautilus

Yeah, got it 👍 In my case I did not notice any change even, maybe it is little bit better, not sure. On a road with curves and some speed it will just go over the lane and maybe try to turn a little…😅

Finally in front of a computer so was able to see the links on your signature. So, based on this: Do I understand correct you were never able to resolve it to a satisfactory level (i.e. lane assistant working like in pre-FL ŠS / VW Passat)? Or is there a way to sort of "force" travel assistant to work with lane assistant when ACC not active?

Yes, and it works fine with ACC. But lane assist stays ”dumb” sailing from side to side, strange 🤔

One thing that annoyed with the car (-23 Superb iV L&K) from the start (when compared to old -19 VW Passat) was the normal lane assistant that kept going from sideline to middle line, i.e. the "ping-pong effect". Travel Assist works fine, like on Passat, when ACC is activated, but Passat kept itself on the middle of the lane even without ACC. I hoped this would've helped to reach a similar effect for Superb. I changed all thee settings: Point_of_intervention: early -> early_setting_over_menu, HC_Warn_Intensity: No_setting -> Setting_over_Menu and Lane_assist_off_text: disabled -> enabled. This brought "adaptive lane assist" to the lane assist menu and also possiblity to set the warn intensity (no idea what this actually does, the options are low, medium, high). But even with the adaptive lane assist checked, the car seems to behave exactly the same as it did, going from side to side. Has anyone faced this kind of issue? Any pointers what could be tried to overcome it...? Electornics should be in order as the Travel assist works...

Nevermind, it is still there in the app 👍 Along with some other intersting ones, the list on the website is not as comprehensive as what you see in the app once it is connecte to the car...

Ok, thanks. I must have dreamt about the trailer assist 1-click app, I cannot find it anymore 😅 No long coding instructions available either for FL Superb, Kodiaq only and pretty sure the same does not apply…

Ok, now I saw this in original post: 23.07.05 OK OBDEleven App -> Tailgate Sound orig. ON -> OFF …but what does this mean in practice? 1-click app only?

Great job - thanks a lot for these. It’s been a pain to try to find FL coding options on-line, especially those compatible with OBD11. I see there is one-click app for enabling trailer assist, has anyone figured out the specific adaptations / long coding required to enable it? What about disabling the tailgate opening warning sound? Instructions I’ve found for non-FL did not work.

Don’t have it but I do have OBD11 Pro. Can you share what you changed? In case same would be possible with OBD11…