Bentylersage
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by Bentylersage
-
-
Not much with a stage 2 probably about 15bhp I would expect but the response would be vastly improved. Stage 3 on the other hand should see a good few extra ponies
-
Right then guys today we finally found out what the fab was running after our IGTR Stage 1 remap. To say im happy with the results is an understatement
Next up Stage 2 :p
-
3
-
-
Yes we will have to remove the ecu to map it. Unfortunately there is no way around this as of yet
-
1
-
-
Bucko - I went with our software and not revo only because with revo we have to desolder a chip on the board in order to map where as this version is just a bench map. Its £299 for just the remap or £349 to have it done with the dyno. I can offer revo but not sure of the cost off the top of my head.
That is true Richard I may give this ago as a future mod be interested to see how much difference it makes
-
I work for a company called indigo-gt so mapped it ourselves.
R1chard - I didn't sorry, left it as it was. I did read up on a few members finding. How does it fair up to the water now? As I would assume it's there to stop direct contact with the water.
The mats I got from tps our local vw parts suppliers bud
-
Bentylersage - Mk2 fab monte carlo - Bridgend
-
Not at the he moment sorry ,the dyno was being serviced at the time of mapping so didn't get it done and been to busy driving it to get it done lately
If all goes to plan I've got some lowering springs to fit this weekend ,I've gone a different route from the norm so I hope my gamble pays off. I'll snap a picture of the part number for you if your still stuck for it
-
Finally buckled and got her remapped today.pulls alot stronger now so I'm looking forward to a power run when our dyno equipment comes back from servicing ☺
-
1
-
-
Thought it was about time for a good service with oem parts except for the filter. I decided to go with a revo replacement element instead as it works out more cost-effective plus better gains over the stock item.
I found this when removing the old one
So much for the full service history eh?
Anyway all fixed with this now
-
1
-
-
They look like powerflex bushes to me ant,usually quite easy to fit providing the originals press out okay
-
First mod, the mandatory sunglasses holder
Recently got myself a nice set of oem rubber car mats very happy with the fit on these ☺
-
1
-
-
-
I've been on here a little while now and not had time to get a thread started until now. I've recently picked up a fabia monte carlo 1.6tdi 105bhp model. All in all I'm quite impressed with it and hopefully I won't go to mad with it as it's used as my daily.
Here are some pic's from when I picked her up
-
double post
-
My names Ben , I'm 28 and from the Bridgend area . I have recently taken ownership of a mk2 fabia Monte Carlo 1.6tdi. Hoping to use the forum for inspiration with the new daily and try and not go to mad with it (if possible)
Already fitted the sunglasses holder and completed a few vcd's tweaks and enjoying the car quite a lot
My Fabia Monte Carlo 1.6tdi
in Fabia Projects
Posted
Stage 2 i would say needs a turbo back exhaust system with dpf removal, egr blanks, Intercooler and a remap to compensate
Stage 3 would be turbo swap and possible injector nozzles if needed aswell as a remap again