-
Posts
51 -
Joined
-
Last visited
Profile Information
-
Location
derbyshire
Car Info
-
Model
fabia vrs mk1
sammmm07's Achievements
-
it's not majorly squirting oil out! just seems to be quite alot of oil build up on top of the gearbox and the pump being the highest point
-
just been told my that the oil leak is coming from the tandem pump which he said will be the gasket, but I've had a look and seems to be a couple of different gaskets! do you know what sort of job it is to change it, do you need to block pipes off to do it?
-
where would you reckon to start then?
-
been told my oil is leaking from the tandem pump which will be the gasket? anyone changed one before on the other hand I thought it was fuel that ran through the pump?
-
thanks pal, but I don't think it's the bumper brackets but for the sake of a few quid it's worth a go
-
the tab on the front bumper has snapped, the one that goes next to the headlight, obviously it doesn't fit flush! I've tripped repairing the tab but it's just keeps breaking! anyone managed to sort it out or got solution to make it look better?
-
my fans don't work altogether
-
East Midlands Meet - Wednesday 20th April 2016 - Junc 28 M1
sammmm07 replied to Brimma's topic in East Midlands
I'll be a newbie but only live round corner -
is there a pcv valve on the pd130 vrs engine?
-
can repair the damage my self but will need painting after
-
got a smoothed front bumper in black wanting a to swap for a standard one bad point the bumper is cracked at the bottom of the fog light and filler has cracked on the edges of where the filler has been filled
-
I managed to take the vents out but I can only see the plastic which the air comes to the vents I can't really see what you mean with the metal bar? am I just being dumb?
-
got a right creaking noise when drive slow, and corner, can't really hear it when up to speed, had mot few days ago and they didn't advice anything to be a problem about from track rod ends were worn and they've been changed! the only creaking noise I can find that sounds like the noise is pushing on top of the bonnet where the scuttle panel is? any help would be great!
-
is it a case of black to black and yellow to yellow then mate? or would the black wire on the guage need to be to a different wire?