dskoric

Thanks for the suggestion. I can try this and see if that is the root cause of the issue, even though I doubt that bushings are the culprit due to the fact that car is still basically new and has only 20000 km I heard about that procedure and to be honest don't know how they did it in the shop, but they are dealing only with this kind of car modifications, so I guess they know what they are doing... but you never know.

Hi, I have installed Eibach Pro Kit on MY16 Octavia VRS and now can hear creaking sound/noise on front end. It is not loud and it can be heard only in a specific situations eg. driving over speed bumps, climbing up the curb... basically when ever there is a rapid height change combined with slow/slower speed. I have went back to the shop where they installed Eibach springs, demonstrate the sound, and after they checked everything they said they don't see any issues and the sound is acceptable because the car is lowered now. As I am not sure what to do now and should I just ignore the sound wanted to check does anyone have similar experience with the same setup? Thanks.

@Brooksuk - you commented that „The car rides the bumps better and yet the handling is firmer / sharper“ Would you say that comfort is improved, unchanged, or firmer in general? I primarily mean here in city drive, not the open road. Thanks.

I am also trying to decide between those two and based on the reviews and youtube videos I am currently leaning towards CBIs

To he honest haven't noticed any, but still didn't test much... What I have found on drive2.ru (google translate) According to TPI software update to version 0252 on MIB2 Bolero fixes the following complaints: - Is temporarily closed indication of optical parking aid when reverse gear, acoustic signal system is in order. - Display parking system on the screen does not turn off at speeds above 10 km / h. - Sporadic failures rear view camera display.

I have tested this update (my previous version was 0245) All I did was unpack the .iso with WinRAR and put the folder structure + .txt in the root of the SD card. To start with update procedure press and hold the MENU button and wait for the service menu to appear. Select SW Update, then Update, Select SD card, select Release and finally press Start. P.S. ​It is multilingual SW

banksie you have PM