Jump to content

spiz

Members
  • Posts

    95
  • Joined

  • Last visited

Everything posted by spiz

  1. The bracket under the passenger seat can mount either the amplifier or the voltage stabiliser. If you have the amplifier then that will be under the passenger seat and the voltage stabiliser will be under the drivers seat.
  2. Smartlink was activated on my Yeti Amundsen today using the 000 054 830A item pictured above. All good! Cheers
  3. Gummi Pflege the seal that is in between the door and the body, not the one around the glass. I observed the same that when the glass was fully up the creaking was worse. One application cured it for a little while, the second a few days later cured it permanently. I used Einszett Gummi Pflege. Cheers
  4. Sorry, left out the zeros after the "L"s but I think you realised that... The "B" suffix is a 17" wheel. The part number you require (M/T) appears available. From your VIN your parts person should know the exact part for your car.
  5. Your wheels are 17"? Does your wheel show 5L601025M 8Z8 & 5L601025T FM9 on the rear? That is the part number for the FL "NEW DOLOMITE" Dolomite wheels came in both 16" and 17" versions. 5L0601025B shows as"DOLOMITE" 17" but I think different colour to yours.
  6. That part number is a different unit and for voice activation, not app activation. Ask for a quote on the 000 054 830A. And if the price includes labour to do it. I'll check where mine came from & let you know.
  7. Paid around 200euro last year. At the time the dealer had no idea, so bought it myself as part of a larger order of Skoda parts. (we own more than one Skoda.) For AU some Yeti versions had Smartlink activated as default, others had the activation as part of the Tech Pack. (listed as a value of $250 in the tech pack.) My service is due next month & will be asking to dealer to activate at that time. I'll report back if successful or not. Maybe wait till then for a definitive answer..... Cheers
  8. You need the activation key which the dealer will have to activate. (& can only be used once.) I have an unused one here which I plan to have activated at the next service. :-) Pic with part number attached. This item was listed as an available option on one of the AU brochures.
  9. Access by removing the cover from behind the low beam bulb. DRL/side light is located deep underneath the low beam section. Manual says to remove the headlight. Doesn't mean you have to if access is possible.
  10. That shows some of the codes of what is an 8 page list that you could get from ERWIN or your dealer. 20 1T0 498 621 wheel bearing with assembly parts 4 holes 2 PR-1ZA,1ZE, 1LJ (20) 1K0 498 621 wheel bearing with assembly parts 3 holes 2 PR-1ZF Cheers
  11. We did this recently to our Octavia (Swing ->Bolero). The Bolero was ex Yeti. It was a plug and play swap. No VCDS required. You'll require the PIN for the Bolero. Only needs to be input once. Bluetooth streaming is great! Cheers
  12. It is a purchased module. (Your second listed.) Easier to fit this module rather than coding & warranty complications. I removed the radio trim, plastic trim that runs above the glovebox and under the switches, and also the heating controls for access to the existing wiring.
  13. 84 is correct for 185/60R15 on a Rapid. Any rating over 84 is legal.
  14. Depends on what front brakes are fitted. Check the build code sticker near the spare tyre... 1ZA, 1ZE, 1LJ have 4 holes 1ZF has 3 holes Recommend the oem one.
  15. This may help: http://compatibilitylist.skoda-auto.com/
  16. Do you have the Amundsen (Nav) or Bolero head unit? If Amundsen, on the paired devices screen, are both the phone & music symbols green?
  17. From the Skoda brake manual.. Caliper guide bolts: 30Nm Caliper carrier bolts: 190Nm
  18. Yes. BCM is p/n 1K0 937 086. Thanks for clarifying.
  19. Wanting to enable rear parking lights with DRLs. Know the adaptation channel, just need to get access to it.
  20. Any suggestions as to the Access code for 'Controller 09 - Central Electronics'? '31347' works on Octavia 3 but not Yeti...
  21. I had the same issue when fitting an RCD330. Delete your phone from the phone list via Maxidot. No need to disconnect the BT module.
  22. It could be that the opening of the boot is not detected correctly and hence auto locking the doors again after 30 seconds.
  23. Try resetting the Amundsen. Hold down the power button for 10+ seconds.
  24. Hi all Fitting a module like this will result in the start stop button remembering what state it was in when the ignition was switched off. It doesn't kill the start stop system completely, just remembers what state you prefer the button in. A "plus" version is required for Yeti. It connects via 3 wires to the wiring of the start stop button. Purple/White (car side) = Signal Yellow/Black (car side) = IGN+ Brown (car side) = Ground Fitted and works as described.
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.