Jump to content

KarelM

New here
  • Posts

    2
  • Joined

  • Last visited

Posts posted by KarelM

  1. I have a similar question: Can anyone tell me what the "Acceleration" is? It's in the long coding for Controller 17 (Instruments), it's not enabled  but I have no idea what it could do. I try to enable it, but I don´t notice any change (i.e. in Maxidot). 


  2. I finally had some time to play with VCDS on my new Superb.

    I know some of you (especially the Taxi-ists) have been asking if the button next to the gear stick can be used to close the door. By default, it does not, however with a simple VCDS change it can.

    Image8.png

    You will need:

    - VCDS cable with a valid license and a computer

    1. Connect VCDS cable and turn on ignition. Do not start car. Open VCDS and select address "6D-Trunk Electronics":

    Image1.png

    2. Select "Security Access":

    Image2.png

    3. Enter the secret magic password "12345" and click "Do It":

    Image3.png

    "Dark Helmet: So the combination is... one, two, three, four, five? That's the stupidest combination I've ever heard in my life! That's the kind of thing an idiot would have on his luggage!"

    4. Success!

    Image4.png

    5. Select Adaptation and then select the relevant channel (highlighted below). Choose "Activate" and then select "Do it".

    Image5.png

    6. You may also wish to turn off the beeper. You can do it one of two ways.

    Option 1: Select "Volume of warning signal in automatic operation" and choose "Not active" . Note it's not actually a volume, just an on/off.

    Option 2: Select long coding, then clear the option "Tone Generator Installed"

    Notes:

    - There are a few other things you can do in adaption like change the pitch of the warning tone (default is 1000Hz) and the duration of each 'beep" (default is 0.5 seconds

    - You can also enable closing the door by the keyfob, see the picture in part 5 above and the rest is obvious

    - Note on the two options: "Touch function for closing" requires you to hold in the button until the door is closed. If you release the button the door motion will stop. "Tap function for closing" just needs a single push on the button to close the door. I'm not sure what happens if you activate both options as I didn't try it.

     

    Any idea how to do it for new SuperbIII ?? Thanks.

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.