-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Everything posted by Kgn
-
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
I agree hmcn, Mine did the same, worked for a month or so. Like a buffer is filled up and then it becomes very slow and at the end stops working. The wheel I purchased did have some other keys, so I reused my own keys like Lane Assist - no problem with that. -
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
Hi hmcn, Changing the optocoupler didn't do the trick - sorry! It only worked for a month or so! I found a steering wheel with defective leather and replaced the two pcb's - it has been working like a charm for almost 3 month. Something else is wrong with one of the pcb's (another component), I just hadn't had the time to investigate. So my advise is to find a steering wheel or new pcb's and replace it. I hope you find a good and not too expensive solution. -
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
Just an update, if someone is still following this tread 🙂 I have now replaced the right optocoupler, the operation seems to have worked. I can now scroll without any delays or periodic function. At the end it more and less stopped working, so I managed to find the optocoupler at something called RS Components 👍 It needs soldering, so make sure to have a good soldering iron. I will update you all, if it stops working again! -
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
Hi again 5k0d4, I actually found a used steering wheel at a car wrecker; I replaced the PCB´s and it worked perfectly. Then I found the cleaning instructions of the sensor, and that worked as well. So, I returned the Steering wheel and my old PCB worked almost ½ year. If you do a search on: 5E0 919 719 F WHS - either on Google, Ebay or similar, you will find a replacement kit. Currently my scroll button works sometimes. Good hunting. -
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
FYI: I managed to find the fault! It was the optocoupler which needed some cleaning -
Faulty steering wheel controls for Maxi dot
Kgn replied to DS814's topic in Skoda Octavia Mk III (2013 - 2020)
Hi Milentije, Did you managed to find the reason for the faulty scroll wheel on the right side for the Maxo Dot? As I now have the same fault! Now the car is not new anymore, so pretty sure Skoda will not accept it as a warranty case. But prefer to find an easy fix, so probably have to order a complete set of Steering wheel buttons: 5E0 919 719 A -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Excelent, that makes absolute good sense. That is why I wasn't able to communicate with the controller - as I dont have the controller I am very grateful for the help -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Hi Jbastos, I think the Lowline coding did the trick . The camera picture came on, as soon as I put the car in reverse. Thank you all for the good advice. -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Okay thanks, I will try Rosstech -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Okay, I get it now. But because I get the error message when entering 6C, I am not able to read out this code Any ideas? -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Yes, same instruction. But not sure what this means: "6C (Manual tr.) > long coding: 0484020102002017000040" (I have manual gear) Otherwise all has been followed and confirmed. -
5TA827566B rear-view camera problem
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Yes, that the one. I just ordered it from: http://www.vwmodul.de/Lowline_Camera__Accessories/Camera/5TA827566B-MutatAlap.html -
Hi guys, I hope someone can help me! I have just installed the original rear camera 5TA827566B (with washer). It had 3 wires, one short black wire for V-, one long red wire for V+ and one yellow midle length for activating the camera (connected to the reverse light). Video cable connected to the radio unit (Pin 6 & 12). Then I have done the coding as per instruction: But I do not get any video signal up in the radio! When I go in and activate the "Car_Function_List_BAP_Gen2_VPS_oxoB", my sensors also disappear from the radio. I have attached 2 pictures - "No response from Controller" failure code from VCDS. I think it has to do with the Gateway connection (Pin 12 CAN LOW & pin 6 CAN High), but not 100% sure. I hope someone here in the forum have an idea. Thanks in advance :-)
-
Skoda Octavia 3 - LED DRL dimming on turn signal
Kgn replied to Kgn's topic in Skoda Octavia Mk III (2013 - 2020)
Thank you very much PekoSI, And Yes, I saw it on the Fabia. -
Hi all, I need some help with programming the LED light to dim, when the turn light is on -like Audi have and the new Rapid. So if there is someone who has a VCDS guide on how to program the LED light to dim (with Zenon) when the turn light is on, I will be very pleased. Have tried the DRLs flash alternately with indicating, but this looks like as there is a problem with the light Have search for it on here, but no results - found this on Youtube though: https://www.youtube.com/watch?v=QkFoM9zCneo Thanks in advance /Kaare