a18nkd

Cheers i tried using this link on my phone but just got loads of adverts blocking the page so i tightened the 6 inner bolts on driveshaft to 40nm so maybe need to tighten a further 10nm

Hi all my driverside drive shaft snapped at the nut end after looking i decided to replace the whole drive shaft my question is does anyone know the torq setting for the hub nut and the torq settings for the 6 inner bolts of the same side and any tips you may have thanks

Cheers for these numbers skoda_Driver1972 what's your thoughts on a solid mass flywheel clutch to a dual mass flywheel as there is a big difference in prices ghanks

Hi can anyone give me the part numbers for :- -Clutch kit -Injector seals -glow plugs On my octavia mk1 1.9 tdi (asv 91kw) please as I'm getting 2 different numbers for all thanks

Problem fixed all fuses look ok or at least I thought when I took the fuse out closest to passenger side there was a tiny black dot so i sanded the blade to clean it up this morning then when I have drove back home did not come on once problem solved thanks for everyones help pleased as we die to go to blackpool at the weekend

Octavia 1.9 tdi elegance thin its 110 on a 02 plate Mk1

Hi all please help me I have these fault codes any help would be great I.e what wires am I looking for? Where is the grounds for the pump? And which fuses do I need to check The top fault code only came on today but the other has been on for a couple of days help please

Can you get the maf sensor number for me please and if it matches how much posted thank you

These are pics of the new maf no part numbers on it

These are pics of the new maf no part numbers on it

Cheers for any help

This is what my vcds is showing with it plugged in or not I have been back to the shop and he says he can sell me another one while that one is sent off to bosch it could take up to 6 weeks to get a faulty or not from bosch so I would have to pay before it's sent he says the my lack of power and the maf fault 17552 is a sticky actuator on my turbo is anyone local two Washington Tyne and wear that I could swap maf sensors with a known working to try that cheers for any help car is a 02 octavia 1.9 tdi 110bhp AHF/ASV ENGINE

A local car parts shop not euro parts just a little one but he says that he's sure it's a bosch one and it's rare they go wrong like this

The old even tho is was goosed was still reading 0 when plugged in and went to 550 when unplugged where as this one reads 550 all the time plugged in or not

Don't know as it was exchange £64 + exchange for new one but have just try'd my brothers maf out of a 130 gttdi golf and the actual maf was changing as you revved engine not that far off the specified maf as that changed then as soon as the 'new' maf was put back on its stuck on 550 actual maf so this is my thinking this 'new' one is no good?

Hi all I had a maf problem narrowed it down to sensor so replaced it with what i thought was a bosch was told it was bosch came in bosch box but no bosch printed or etched into it now I have fault code 17552 ground open/close /short now I have looked at wiring and it seems ok back to ecu under wiper cover now i have put it on the vcds and the actual reading is a constant 550 and doesnt change when revving engine also doesnt change when unplugged am i right in thinking this is not a bosch maf as it would be stamped with bosch on it, and the actual reading not changing if plugged in or not means this is one of those faulty copy's thanks for any replys

Cheers for the help

Cheers do you know what this wire is for ? And would it have anything to do with the 17552 fault code thanks

Thanks my local part shop sorted a new bosch one £64 exchangei have fitted it but now its coming up with 17552 fault code so just going to check wiring and connectors but where is my ecu ? Under wiper covers?

I all i have bern having maf problems lately fault code 17552 and when checking wires from maf towards bulkhead i put my hand ontop of black box on battery (without cover) and it was hot then when i had a closer lokk this is what i found Any help on what this cable is for? and what would cause this to melt ? Also can i get just the fuse think it's a 100amp fuse or do i have to buy the whole thing thanks for any info

Hi all can anyone tell me which is my Part no. On my maf please and does it have to be bosch thanks

Thanks nige8021 engine code does start with asv I have had a look at the link ad there is a few different part numbers for the same injectors I.e no.1 and no.2 do you know which ones I need for my car as I think I have a leaky injector as it smokes when starting only when left over night is it just as easy to change nozzle or easier to change whole injector thanks

Hi does anyone know the part numbers for the injectors on a 1.9 diesel 02 octavia mk1 I think the engine code is asv it's the 110 bhp thanks

Hi this is the vcds blocks when at norm temp

I haven't had a look yet but it's a asv engine if that helps