timz

Skoda Octavia Mk II (2004 - 2013) BCA engine 1.4 found melted fuse 25A but not snapped the third insight. car stop working. fault code reading: I don't know what to look for ... please help 08482 ---008482 - Accelerator Position Sensor (G79) 08487 ---008487 - Accelerator Position Sensor 2 (G185) 01024- Rain Sensor(G213) 01592-Air Quality Sensor (G238) 00275-ABS Outlet Valve: Right Rear (N135) 00280-Differential Lock Valva 2(N126) 00835-Connection to Convertable Top Control Module

fixed positive cable were touching frame of car isolated cable and engine error is gone thanks guys for you help .

one new code ---after i disconnected EVAP purge valve and started engine . 01092 - Switch for Stowed Canopy (F171) + same '' 17833 - evap purge valve (n80) short to ground''

I will try now ...

one new code ---after i disconnected EVAP purge valve and started engine . 01092 - Switch for Stowed Canopy (F171) + same '' 17833 - evap purge valve (n80) short to ground''

so far ...... 1)EVAP purge valve resistance 26 ohms 2) I replaced relay 458,460,167 3) replaced all fuses 4) replaced Purge valve 5) checked continuity of cables from valve to ECU no result ...........

thanks which one is main relay? is 458?

hi I did continuity test on ECU connector , big one worked as shows with red arrows but on shorter connector I can't find any contact to ground . I don't know what to do next ...

I will check that tomorrow. Thanks

I have only two errors ---'' 17833 - evap purge valve (n80) short to ground'' "00022 - motor for warm-Air Flap; Center Console Right Rear (v201)" ​is that possible ? to do not affect other devices

I removed and tested it opens and closes , resistance is 26 ohms .

yes I did 26 ohms

any idea what that can be ? and how to find ?