yfaykya

22 February, 2022

Answering myself : https://www.amazon.co.uk/gp/product/B00FRBM9YM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

21 February, 2022

Did you manage to do this?

Looking to do the same.

21 February, 2022

Had some wires damaged and want to do some clean up. Anyone know what type of crimps I need for the wires that connect to the connectors for the Columbus?

Thanks!

21 February, 2022

17 July, 2017

I bought one. But now I don't know where to find the correct "firmware" file to upload. Any ideas?

Thanks!

10 July, 2017

Bump?

28 May, 2017

Hi,

I bought a higline RVC (5TA827566B) to retrofit to my S3. After much struggling I found out on ross-tech forums that the camera was not initialised and needs to be and this cannot be done from VCDS. Does anyone know how I might do this? Been over 6 months now and now the summer is here the kids play in the driveway and that freaks me out!

Thanks!

23 April, 2017

I need to code a highline RVC for an S3. VCDS cannot do this (no factory init IIRC). Anyone in west of Ireland who has a VCP cable I could borrow? Thanks!

7 March, 2017

Ah. I think that is the lowline version. Not sure it needs as much coding.

7 March, 2017

On 1/17/2017 at 15:47, pist0nbr0ke said:

VCDS worked for mine, on a 2016 Octavia. Is it different for a Superb?

How did you do it?

1 March, 2017

Darn. €240 on top of the 300 I paid for the Ross Tech one.

23 February, 2017

Anyone know where I can get a vcp vag connector? Googled a bit and don't see later skodas down as supported.

31 January, 2017

They sold it claiming VCDS was all that was needed. Anyways the issue here is the lack of response. It took me 2 weeks to get a response form my first 10 emails. Then I got give instructions for how to install it with VCDS from them. When I replied over a week ago they sent in last couple days saying (and I am quoting!) -

"Hi You need go to VW dealer for on-line. On-line system will load sw to camera. Or you need vcp vag Can programmer"

So why send me the instructions in the first place etc?

Anyways - I am going to try and source someone to do it for me. I just wish it was not the best part of 3 months trying to get it going.

28 January, 2017

For some reason I was not get notified of updates here. Looks like I will have to get a vcp setup but I wonder how pistonbroke managed it? Anyone with VCP in Galway area? If not I guess there might be soon :-(

14 January, 2017

Hi all,

I bought a highline rear view camera (http://www.cars-equipment.com/www/en/shop/rear-view-cameras-12/oem-rvc-mqb-rear-view-camera/) from this site. I installed it but it is not coded. I have mailed these guys multiple times and have not got a response. Just flat out ignoring me!

Does anyone know if I have any legal recourse etc?

Thanks.

Thursday,05,January,2017,15:48:49:56270
VCDS Version Release 16.8.4 (x64) Running on Windows 10 x64(VirtualBox)
www.Ross-Tech.com

Address 6C: Back-up Cam. Labels: Redir Fail!
Control Module Part Number: 5Q0 980 568 A HW: 5Q0 980 568 A
Component and/or Version: RVC Compact+ H07 0180
Software Coding: 0000000000000000000000
Work Shop Code: WSC 00000 000 00000
ASAM Dataset: EV_CamSysRVRVCARPANAMQBAB 006008 (SK48)
ROD: EV_CamSysRVRVCARPANAMQBAB_005_VW48.rod
VCID: 3B5BCBF3B2BE6E9ADC-806F
3 Faults Found:

10490624 - No End-of-Line Programming
B2013 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 150
Mileage: 9017 km
Date: 2017.01.05
Time: 14:51:55

ARA_error_bits: 0
ARA_function_operating_time: 0.0000 s
Poor_image_quality_reason: Environmental conditions
Poor_image_quality_reason: 0.0000
Camera_System_Operating_Condition: OFF

13636352 - Control module not coded
U1013 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 150
Mileage: 9017 km
Date: 2017.01.05
Time: 14:51:55

ARA_error_bits: 0
ARA_function_operating_time: 0.0000 s
Poor_image_quality_reason: Environmental conditions
Poor_image_quality_reason: 0.0000
Camera_System_Operating_Condition: OFF

10489856 - No Basic Setting
B2010 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 5
Fault Frequency: 1
Reset counter: 150
Mileage: 9017 km
Date: 2017.01.05
Time: 14:51:55

ARA_error_bits: 0
ARA_function_operating_time: 0.0000 s
Poor_image_quality_reason: Environmental conditions
Poor_image_quality_reason: 0.0000
Camera_System_Operating_Condition: OFF

3 January, 2017

I get a black screen when I go into reverse now (plus the OPS on the side). I guess that means the video feed but I have that cabled into the blue connector using pins 6 + 12.

Also I used the CAN on the grey connector for high and low and the power from the main power to the head unit. The handle works in the boot so power seems fine.

1 January, 2017

You find it in the radio unit socket. Be careful, there are 2 different can's - engine and infotrainment. You need to connect to correct one twistd pair - orange/violet (CANH) and ornage/brown (CANL). In the same socket You have power (red and brown) and in blue small socket pin no 6 is for the signal and 12 is for shield.

Thank you! I found them by trawling through google for about 2 hours on Russian sites.

30 December, 2016

Ok - I sort of figured it out - All I need now is is CAN+ and CAN-.

Not sure how to find them.

29 December, 2016

Hi all,

I'm trying to figure out the cabling for a highline 5TA827566E. It has the standard 2 pin Video connection that goes into the blue plug in back of the glove box. It has 4 other cables that i assume are power related.

There is a orange, black, red and brown cable. I have all cables routed to the front at the moment.

Any help would be greatly appreciated.

29 December, 2016

Hi Milanj - Did you ever figure this out? I am trying to connect a 5TA827566E at the moment.

28 December, 2016

So I eventually got around to this. I have fitted the camera and now have the cable ends at back of glove box. Not sure what connections I need now as I have lost any original docs I may have had and the company has not answered me in over 2-3 weeks.

The camera was : http://www.cars-equipment.com/www/en/shop/rear-view-cameras/oem-rvc-mqb-rear-view-camera/

So can anyone help me with the connections?

I'm assuming the 2 crimped connection (2nd and 3rd from right in the pic) go to pins 6 and 12 on the blue block at back of DVD unit. Not sure on rest. I assume I need a +12v and a GND, maybe a control cable.

Appreciate any help.

Thanks.

Not sure that pic attached right. http://picpaste.com/2016-12-28_16.19.00_HDR-fQQryZvI.jpg

28 December, 2016

So I eventually got around to this. I have fitted the camera and now have the cable ends at back of glove box. Not sure what connections I need now as I have lost any original docs I may have had and the company has not answered me in over 2-3 weeks.

The camera was : http://www.cars-equipment.com/www/en/shop/rear-view-cameras/oem-rvc-mqb-rear-view-camera/

So can anyone help me with the connections?

I'm assuming the 2 crimped connection (2nd and 3rd from right in the pic) go to pins 6 and 12 on the blue block at back of DVD unit. Not sure on rest. I assume I need a +12v and a GND, maybe a control cable.

Appreciate any help.

Thanks.

21 July, 2016

If it's at all important, the MY17 camera is the same 5Q0 980 556

Thanks - I just need to figure out what I need to fit http://www.cars-equipment.com/www/en/shop/rear-view-cameras-3/oem-5q0980556-rvc-inner-highline-camera/ or http://www.cars-equipment.com/www/en/shop/rear-view-cameras-3/oem-3v0827566c-highline-rvc-with-washer/

Wondering will I need some sort of mount etc.

20 July, 2016

Is the 5Q0 980 556 not an audi part? Does it fit ok to the boot?

Is this all I need? http://www.cars-equipment.com/www/en/shop/rear-view-cameras-3/oem-5q0980556-rvc-inner-highline-camera/

Thanks!!

19 July, 2016

Oh - and what is the difference between lowline and highline ?

Profiles

Forums

Gallery

Shop

Events

Downloads

Posts posted by yfaykya

Important Information