Andy730

I copied across the whole file, with the 22 sub-files inside that. I have Amundsen. If you have the time, that would be great, thank you

Thanks for the reply and info. Unfortunately, even going through this process (again), it just will not pick up on the fact that there is information on the card and I just get the 3 greyed out options.... I have just tried to update maps and that won't work either..... Very frustrating as I did this with my Mk2 and it worked like a charm! edit: I have just ordered a new 32g SD Card which will arrive tomorrow. Fingers crossed that will help. I'll let you know how I get on.

Hi @varaderoguy , I have followed your instructions to the letter. I chose the top option (labelled firmware/updates). I selected 'Upgrade' as the next stage and then it took me to another screen with 'Choose input option'. and below that was listed CD Disk USB SD Card All three are greyed out. I have also tried to update via the settings and 'Update Software' This option goes to a green rotating circle but after a few minutes comes back with no media source to allow update. Can you or anyone else assist with why and what I might be doing wrong? As I said, I have followed your instructions and tried with several different cards but, user error can never be ruled out. Andy

Hi @pab567 I have just fetched my new (for me) Skoda Superb Mk3 65 reg. I am looking to update the FW and maps (maps currently downloading). Can you say if there is a FW update and what that would be (a link to it possibly?). Currently, the screen is showing the following....... Device part number: 3V0035020A Hardware: H42 Software: 0318 Navigation database: V03959801JJ0122 ECE 2015/2016 V03959801JJ 0122 ECE Thanks in advance and hopefully your help. Andy

Are the footwell lights on as standard on a Mk2? Currently mine come on when I enter or exit the car but are not on low when driving. I have looked for the option to turn them on but there is nothing in the Light settings options. Do you have to turn on the option via a Ross-Kemp cable and if so, has anyone got the code? Thanks in advance. Andy