Daxmatt

Basically totally fed up with the electric windows, it's had a new loom, new switches, but not the convenience unit, I'm kind of loathed to fit one and then have them break again 6 months down the line, is fitting Front wind up windows an option, did any roomster come with them, or can any be fitted from say a fabia ? Thanks Matt

Haven't fitted it as yet as I'm a bit reluctant without knowing the settings not to use it on I do get where some of the other poster's are coming from but all I wanted was the settings not to use it on and they should be a standard thing on this unit for my vehicle, I'm not asking for warranty work and I'm not expecting them to stand to any problems that may occur from fitting it either

So I bought a second hand DTUk tuning box, it's for my yeti so it's the cr170 version I have the original receipt so I know it's the correct one for the car, so upon getting the unit you read the instructions as you do and in the instructions it says, some vehicles can not run certain settings so get in touch for advice. Ok fine so I fire an email off to dtuk tell them the situation, this should be an easy thing they receive the email and they then say ok yeah don't use settings blah blah blah for the cr170 No they refuse to tell me anything due to there insurance not allowing them due to the fact I'm not the original purchaser. I don't see how someone having bought something albeit second hand ( as many people do ) with the original purchase receipt can not be told a simple thing of the settings it shouldn't use, regardless of the purchaser or the unit the settings not to use would be the same for my vehicle, I just find it pathetic that they won't divulge this information given the proof I have it's the correct unit for my car The idea was see what this unit was like then if I got on with it then I'd sell it on and get the newer app control unit, tbh I won't be buying anything from them (I realise I have entered yet but no future purchases will be made from them) given experience as it's left a sour taste Or am I being unreasonable ?

Hi all, I've just got myself the above mentioned unit and I'm wanting to fit it myself, but I'm wanting to see were people have the usb cable's located, also more importantly were the dab aerial and the gps module is located and were the associated wiring runs and exits the dashboard, if this could be shown with pictures it'd be greatly appreciated Thanks Matt

Not sure it's because of cheaper Chinese unit's, think it's because they're more available now and the others that sell have been cheaper than this one, I'm looking for one myself but the price of this puts it in the Kenwood dnx525 price range and that's a much better unit

Replace the driver's door wiring loom and all will be fixed, very easy job to do should take around an hour start to finish, just get some spare clips for the door card and you'll need a drill to remove the rivets for the speaker and then some to refit it

Fixed it, when they cut the wires they had left about 10mm of wire so I managed to re solder the wires to the main loom plug and then just fit the new loom as per normal, extremely lucky though as the gf was about to take it to the dealers to be fixed wonder how much a new loom would have cost to fit as I don't think they'd have messed about fixing the old plug

So my partner's roomster has had the standard electric window issue however it's gone into her local garage for them to fix it, it's come back and it's not fixed so I did some looking into it found this site and then found the now known door issue with them, so we got the loom from Skoda. In a very short time I had the door card off and thought it would be a relatively easy loom change. This would have been an easy loom change however the Muppet at the garage has cut into the main loom on the inside of the car and run a wire to the door loom........I now have no way to fit the new loom as 2 of the wires in the plug to the main loom aren't there and in place 2 wires that are cut into the main loom......anoyed is an understatement I don't want to have to get the main loom replaced so has anyone had to get any new plugs for this block of wires or would I be better to just go to a breaker's and cut that section of the loom out and resolder a new plug in place ? If that's the better option is anyone breaking a 2007 roomster that has electric windows that can cut that section out for me Any other thoughts appreciated Thanks Matt

Ok so it looks like it's the power boost one I was after lol, back on mate I'll take it

No problem Paul, sorry but I'll leave it I didn't zoom in properly, the Bluetooth wasn't an issue but it's the hp increase unit I'm after, glwts I'm sure it'll not be around for long at that price Thanks Matt

You looked better than I did lol thanks for the clarification on that

60 posted for the pedals, mats and mirrors any good ? Thanks Matt

Hi is it this one but without the Bluetooth https://www.diesel-performance.co.uk/product/dtuk-crd-t-dual-channel-fuel-and-boost-system-for-car-skoda-yeti-from-2009-onwards-2-0-tdi-4x4-170ps125kw-1968-ccm/ If it is that one I'll take it Thanks Matt

Yeah I must admit it's your car that put me on track for them, and I'm thinking that they are the ones I'll be getting rather than the Monte Carlo ones as like you say they do make an impression on the car, enjoyed reading your build thread aswell

All yeti's have plastic removable side skirts fitted, simply replacing it for one that's colour coded