vstarc16

Few days ago I was changing electrical socket at the trailer (for a boat, detachable rear part). Due to inadequately tightened screw short circuit happened in stop lamps circuit. It has happened to me once before, at that time fuse was blown so it was easy repair. To my surprise consequences are the following: no voltage at the pin for the stop lamps at the car (checked with the trailer installation checker) no fuse blown message 'ACC disabled' when trailer installation is hooked (happens even when fully functional installation is attached) I checked the fuses (no 22, 28, 38 are for the trailer) and they are not blown. Scan from the VCDS is attached. Any suggestions? I have already booked service with Skoda steelership, what I am afraid that their suggestion wound be changing complete whole trailer electronic unit. Log-TMBJJ7NE6K0146212.txt

I am getting 4,7-5 l/100 km from 2.0TDI (MY 2019). Car is driven almost exclusively on long trips (200+ km one way) on motorways with some local roads. Speed is 120 km/h, with 3-4 persons in a car.

Hi everybody! I transfered SD card with music from my Octavia III MY 2013 (with Amundsen MIB1) to my current Octavia III MY 2019 (Amundsen MIB2). The issue I am having is that font size of the currently playing song is too big and the title is shown only partially (usually first 2 or 3 words) , previously title was truncated if it wad really too long. Could it be related to some hidden file written by the previous MIB 1 unit to SD card, or it is related to the improper functioning of the MIB 2 unit? Any suggestions?

Hello guys, my previous Octavia Mk3 MY 2013 Elegance trim, had 2 LEDS on middle part (where the switches reside) of the Front interior light that provided discrete nigh time lighting for the front seats. My current Octavia MK3 MY 2019 Ambition trim does have them and I miss their functionality a lot. OEM part with mentioned LEDs is available https://www.skoda-parts.com/spare-part/3t0947105maqd-central-internal-light-skoda-38977.html but I do not does it need some additional wiring (in that case not worth a hassle) and additional coding (less of a problem). I tried to search a Briskoda forum, but I did not got less than 1000 hits no matter of the key wording. I would really appreciate I somebody is having advice.

Many thanks for update!