haris

Hi, with new brakes 340mm and lowered 3 cm ( I think...) with stx suspension. It's 8x18 et 45. I d prefer something 8.5 x 18 or et 40 by the way

Hi, I already know these things. I will use the tow bar for a small simple bicycle stand, without taillights. Also I don't have acc. Parking sensors are aftermarket and I can install a on/off putting by myself But my question is about the correct tow bar and the serial of the appropriate original

??? Isn't there someone who knows the serial of the towbaR ??? Any suggestions??

hi, i have a 1.4 140hp , model 2014 saloon. should i choose skoda's tow bar or an aftermarket ? i found these 2 serials, which seems the same and they are both suitable for octavia iii 5e9092155 and 5e0803881c . which is the correct? also, if i choose the skoda's towbar or an aftermarket, i suppose i can buy whatever brand etc i want for the wiring harness. right? sorry for my english if is bad

That's strange.. Nobody knows if seats are the same for sedan and caravan...???

Hi, I have a 2014 model 1.4 And I found a set of seats alcadara and leather. 1. Are the same for sedan and caravan?? I suppose front are the same, but what about the rear seats? 2 also important. Can I check somehow If the side airbags are OK or they opened etc..

If i understood correct, I can use non- hubcentric 5mm or less Or if the spacer is hub centric, I can use whatever I want..?

Hi, The front lip is 13mm. It seems correct the spacer to be >=13 I don't know what to do

Hi, I ve read somewhere that the minimum size for the front wheels must be 13mm wheel spacer due to a metal lip, which indeed make sense. Something similar for the rear wheels. But I see people using 5,8, 10,12mm etc Without any problem .

Extra trunk light Installation...

OK I did it! 2 metal and 2-3 plastic clips for a piece of plastic. I had to pull very very hard

Hi, Does anyone know how can I remove this plastic.??

Well, I tried it. It's still working with locked car.. So it seems a nice place to.hide the tracker Now I must find out how to remove carpets and get 12v from the 12v socket

Yes I also thought of the 12v in the boot. But I don't think it's working all the time if you lock the car for example

Hi, I want to Install a gps tracker and it has 3 wires. + ,- and acc. I think acc isn't necessary. Any ideas from where and how can I take 12v constant? I don't want straight from battery , I don t want from the driver's fuse box. I need something different for obvious reasons. I need to hide the tracker somewhere and take 12v constant . Also ,I see that I must add a 2A fuse somewhere in the middle.