-
Available coding/adaptation mods
Yes.
-
Available coding/adaptation mods
I am looking for Instrument cluster VCDS admap for Octavia 4 vRS. Who has and share it?
- VCDS (coding and adaptation) with SFD on Octavia Mk IV
-
VCDS (coding and adaptation) with SFD on Octavia Mk IV
I opened the sfd in odis online and with VCP offline. Some adaptation change works and some doesn't. I successfully added the gearbox and engine oil temperature to the instrument panel. I can't add the corner light function. The car animation on the infotainment display shows that the fog light lighting when the steering turning, but the real fog lights doesn't. There is no corner light menu in the lights settings.
-
Columbus retrofit (from Bolero)
I retrofitted the Columbus unit. Everythink is working fine but there is a GPS open failure in DTC. The cheap external GPS antenna is working well, but the failure in DTC disturbe me. I have telematic system with GPS. Can I use this GPS (coding or HW wiring) to Columbus?
-
Amarton changed their profile photo
-
Columbus retrofit (from Bolero)
Hi, I have Bolero and Canton system with Telematics electronic. Can I retrofit Columbus? I would like to buy Columbus unit and display with CP off and enabled all Swap function. In this case the system plug and play? Because off the Bolero not a navigation unit and I think my GPS antenna connects directly to Telematic system. Anybody did the same?
-
1.5TSI old or new (DADA, DPCA)
Hi, Anyone know what the difference between the new 1.5 TSI (DPCA) and the old (DADA) My Octavia had old 1.5 TSI engine. Kangaroo effect appeared and there was a vibration during ACT (2 cylinders) mode. The SW update was partial solution. My Kodiaq has new engine and there is no kangaroo and vibration. I wonder what the differences are.
-
1.5 TSI ACT vibration and noise
Hi, Is there someone here who has problem with cylinder shut off function? If the RPM is around 2000 and ECO signal appears on instrument panel I can hear an abnormal noise. Looks like there is a vibration when 2 cylinder mode is active. The car is on the workshop but there is no DTC so they could no do anything. I have a replacement car and in this car there is no vibration and noise. I think that there is a problem with the engine mount bracket, dual mass flywheel or exhaust system. What do you think?