![](https://www.briskoda.net/forums/uploads/set_resources_23/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Racinggada
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by Racinggada
-
-
10 hours ago, MATT1970GB said:
Hi there, just wondering if you ever found the cause of this problem, i have exactly the same issue with my Roomster 1.9tdi and am also scratching my head as to the cause
For me it was the outer cv
-
It is 0
Befor i started the sustem it was 6
And when i turned the ac on the code became 0
-
No compressor codes.
I will start again.
All started in the last week when it became hot here (40 celcius)
No cooling.
No codes.
The evaporator show 3 degree.
But the ac dont cool enough.
The only thing strange is that the left side is warmer then the right and i have the most simlpe air con sestem.
Not divided or enything.
The inner temp' sensor is allwYs on 29 deg'.
Thanks again
Gad
-
Ofcourse thanks techle.
-
1K0959126D?
-
Thanks. I will check and replay
-
-
Hi. I have a question about the prwssure switch. If 3 tenp sensors good and all have 5v.
And on hot day the ac dont work.
Can you help me with some clues?
-
O.k. what will i sea?
Or what to look for?
And what is normal?
And thanks.
-
Gear model jcr
-
Yes jcr
-
Hi.
I drive 1z8 with 1.9 tdi and 5 speed manuel.
Last week the a.c stopped working so i cheched the thermisters (3) on the unit.
All show a chainge in temp' and all connectirs are 5V.
The pressure in the compresson is geed. But yet the ac not working when it is hot out side.
And some times it is worm on the left side and cold on the right.
I do not have climatronic just the simplest one.
Dose any one hed this issue?
Thanks.
Gadi
-
Be careful.....
Do not use the folling hole on the side like most gears have.
I have the JCR and you have to insert the gear oil thrue the revers switch.
This is the only way to put 1.7 liter of oil.
And from the fil hole you can insert just 0.5 liter so i leaves the higher gears un luubed. So beware.
-
1 hour ago, Tilt said:
I note you have the BLS engine. Are there any related common problems????
Bxe. It is a great one
-
Just now, Racinggada said:
Hi. I had this problem.
If you feel the vibrations when the car on load ? When you push on 1st and 2nd it risses the front of the car then it mean that the inner cv at the driveshaft is damaged in one place.
Look for dry nor damaged rubber of cv's. And look for play when the car is jecked up and secured.
-
On 14/03/2019 at 02:23, Taximan1978 said:
So a took me car for a nice drive down motorway on acceleration the car gets louder.
The vibration comes first then goes off so out of curiosity a took the car out of gear free wheeled perfect no noise so then a revved the engine hard still perfect no vibrations or loud noises.
As soon as a put car back into gear and drove there it is vibratin first and then a loud droun noise sounds like a blown exhaust sound and the vibration noise sounds like a heat shield rattling on the exhaust. All this only happens when driving.
Any more help please.
Hi. I had this problem.
If you feel the vibrations when the car on load ? When you push on 1st and 2nd it risses the front of the car then it mean that the inner cv at the driveshaft is damaged in one place.
Look for dry nor damaged rubber of cv's. And look for plat when the car is jecked up and secured.
-
1
-
Bxe feels like 3 pistons on low revs
in Skoda Octavia Mk II (2004 - 2013)
Posted
Hello.
My bxe mk2 octavia combi (375000km)
Is feeling like a 3 cylinder engin but just when I put load on low revs.
Do any one know what is the problem?