Ryzantium

https://ebay.us/m/SKrk59 This worked for me, just need some crimps and a bag of bullet connectors and maybe a small trim tool and and a few hours.

Had mine done last winter and they just moaned about the ride height and made me pay for new bushings on the front wishbones, also if youve had any issues with your TPMS they may replace sensors as 3 years is about the span. other than that you should be fine.

Yo! what wheel dimensions you guys running? Im just on stock 7Jx16 ET46. 100mm front 75 rear with shortened drop links and how much are you lowered by front and back. (and what shocks/springs you running?) also if your running shortened drop links up front? IMG_3153.JPEG.HEIC

Remove the rear adjuster seats and you gain about 20mm drop on the rears, make sure you cut the bump stops a tad also.

its hard to get right, but its not my thing. but i fully respect what your doing.

IMG_3153.JPEG.HEIC

Hey Guys and Gals! New to the forum, my first post in fact! been a long time lurker tbh 🕷️ My pride and joy that I recently have finished my first phase of mods on; 1.2TSi 110 6 speed manual Forge Induction kit with Black hoses Forge Blow-off valve with Black Hoses Stance + ultra coilovers Wound down to the last threads so 100mm front, 75mm rear drop with Stance+ shortened drop links and New track rod ends for good measure. 📏 Ebay armrest Callipers have 3 coats of very high temperature silver paint Power flow full stainless steel cat-back system Local stage 1 remap but not run on dyno, so my guess is around 150bhp All the mods were undertaken by me on my driveway bar the exhaust and map. cheers.