Richie2019

There is an extension cable(plug and play) between MATCH PP 86DSP & 7S-D. So I don’t need to do anything to get it working.

Is there a heated button on your steering wheel? I heard that we need to have new steering wheel with the heated button to get the icon on VC.

I am using MATCH PP 86DSP & 7S-D with my Kodiaq 7-seat for two years. It works perfect with MIB2.5 High and PP-PAC 92b cable.

Does anyone know how to show heated steering wheel icon on VC? I can activate steering wheel heater from Climate Control of head unit but my VC doesn’t have any icon. Skoda Kodiaq 2018

Yes, the more fuel you burn, the hotter engine gets. However, water pump will help cool down the coolant temperature to 90°C in the situation. So this is not normal with your car. The problem would happen when the RPM of engine runs higher than 2000 and the engine keeps the high speed for few minutes. After replacing a new water pump, the issue got solved.

Thank you for all your suggestion. I finally found the root cause of this problem. It was caused by the fan blade of water pump got stuck. After replacing a new water pump, the issue got solved.

Thank you for your suggestion. Will there be a error code generated after disconnecting the brown electrical connector? What would be the side effect?

Is this the water pump you mentioned?

Thank you for your information. Do you mean this fuse?

How did you fix it? The problem happened randomly.

Thank you for your suggestion. I will check it when the problem happens next time. But it might be hard to check since the problem only happens while my car is driving.

Yes, but it hard to figure out which component causing this issue.

It's Kodiaq 2018.

My coolant level is almost full. My car just finished 45,000 km maintenance service few days ago. How to check if my fan is coming on?

My car is TDI(190hp) 4x4. The coolant temperature suddenly runs higher than 110~130°C. It would go back to normal temperature(around 90°C) when I drive slower or stop the car. The problem doesn't happen every time whenever I drive this car. There is no error code with this issue. What could be the problem?

My car is not Kodiaq RS. But I would like to change the car style from current style(Kodiaq) to Kodiaq RS. Is it possible to do that by VCDS coding? Or how to do that?

Thank you for your reply. I will post the results of autoscan and adaptation maps this weekend. If you have any idea about this issue, please share your thoughts with me. Thank you!

I manually installed TPMS for my Kodiaq. However, it can only display bar unit instead of psi unit. Please refer to the screenshots below. Can I change the displayed unit with VCDS/OBD11? Thank you.

I don’t have the Digital Instrument Panel menu on my Kodiaq with Virtual cockpit. Is there any ways to enable the menu via OBDeleven or VCDS?