hotrod26

Thanks for the info its others on Facebook forum so if I get one off e bay that should sort it

Does the 1.2 petrol fabia have a egr valve car only rev to 500 got these fault codes

What am I looking for in throttle body

Getting fault code po 107 is this the problem

I can see butterfly valve as air box is off

I have my father's fabia at mine as it won't idle or rev things ive done to date checked all vacuum hoses,done a compression test got 8 bar on all cylinders,fitted new seals to inlet manifold had diagnostics on it coming up maf sensor fitted timing pins as someone said timing will have jumped so bought a timing chain kit anyone any ideas as its getting me down now

I removed the valve and cleaned it

Done a compression test 120 psi all three cylinders its the 12 valve engine

Starts but won't idle very little vacuum,read someone had same problem and it was a coil pack wouldnt they show up on obd2 reader wouldn't they

I have done every test possible on this 2008 1.2 fabia no damage to vacuum pipes new seals on inlet manifold was talking to a skoda technician today he reckons timing has slipped as car wont rev could he be right ordered new timing chain kit just in case

Thanks lads I had same fault years ago on a chrysler voyager that was accelerator pedal

I have checked all vacuum pipes and all are fine

Can you shed any light on the fault its my 85 year old fathers transport have you a contact no

would car still run with both these faults would it stop car from revving epc light is on and brake pedal is solid

Car broke down yesterday engine won't rev at all could it be the acceleration pedal at fault got codes 01314 and 00819

Its a 1.2 petrol 2008

That was the first thing I checked I removed it and found nothing wrong with it

Car broke down yesterday engine won't rev and brake pedal is solid anyone any idea what the problem is

All sorted now thanks for your help ordered new part from skoda

6Q20901129 that for a 2008 skoda fabia DE08ZDL

Thanks it plugs in pump then into steering rack you a part no

So its pulled the wiring out of the pump ive a black,brown blue and red stripped back from sensor ive a short piece of wire and another piece thats pulled out of somewhere when drive shaft snapped

Sorry its a skoda fabia mk 2 1.2 petrol 2008

the wiring to the steering sensor has pulled itself out of main loom but which loom any help please