effebi

Hi milanj. Thanks for your tutorial. I'm interested in this mod but, unfortunately, pics you attached are gone. Could you reload them? Thanks a lot

Hello! Following the instruction I found here, I tried to enable TPMS function on my Yeti 1.6 TDI 2014 FL. These are modifies I operated with VCDS: [03-ABS Brakes] > [Coding-07] > [Long Coding Helper] > Byte 16 > Bit 2: “Tire Press Monitoring (TPMS/PR-7K6) installled”; Bit 1: it's hidden so I changed the second value (counting from right) from 0 to 1 on Binary field [03-ABS Brakes] > [Coding-07] > [Long Coding Helper] > Byte 17 > Bit 2: “Tire Pressure Monitoring (TPMS/PR-7K6) via Instrument Cluser (MY 2011+)” [19-Can Gateway] > [Installation List] > “4C-Tire Pressure II” [17-Instruments] > [Coding-07] > [Long Coding Helper] > Byte 02 > Bit 0: “Tire Pressure Monitoring (TPMS) active/installed” The result was that I had Tyre Monitor entry on Maxidot but when I try to save the "new" pressure I got the message "Could not store tyre pressures". In addition I noticed that the TPMS lamp on instrument panel never light on. I did an Autoscan with VCDS getting these errors from ABS: Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb Part No SW: 1K0 907 379 BM HW: 1K0 907 379 BM Component: ESP MK60EC1 H46 0164 Revision: 00H46001 Coding: 913F200E092405FA890B04EB901EA051A70C0020 Shop #: WSC 33361 790 00056 VCID: 7EF9A33AE9F77CBFE3-802A 2 Faults Found: 03243 - Indicator Lamp for Auto-Hold 007 - Short to Ground Freeze Frame: Fault Status: 01100111 Fault Priority: 2 Fault Frequency: 1 Reset counter: 134 Mileage: 159464 km Time Indication: 0 Date: 2014.06.02 Time: 11:23:23 Freeze Frame: Count: 3 Count: 2 Count: 4608 Count: 4410 Count: 44288 Count: 257 Count: 255 Count: 0 00473 - Control Module for Elect. Park/Hand Brake (J540) 004 - No Signal/Communication Freeze Frame: Fault Status: 01100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 134 Mileage: 159464 km Time Indication: 0 Date: 2014.06.02 Time: 11:23:40 Freeze Frame: Count: 0 Count: 2 Count: 4608 Count: 8260 Count: 44288 Count: 257 Count: 255 Count: 0 and this: 4C-Tire Pressure II -- Status: Sporadic communication error 1000 After that I undid the changes made and all the faults disappeared. Do you have any suggestion? Thanks Ciao

Hi there! I'm Fabio from Italy and I am a newly Skoda Yeti owner. It's a pleasure to be part of this community and, of course...to be a "Skoder" 😁 Ciao!