Martyf
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by Martyf
-
-
I've run the VCDS diagnostics and get the following for afs system
-------------------------------------------------------------------------------
Address 55: Headlight Range (J745) Labels:. 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 F HW: 7L6 907 357 C
Component: AFS-ECU H04 0111
Revision: -------- Serial number: --------------
Coding: 01C600003F000000
Shop #: WSC 33361 790 00999
ASAM Dataset: EV_HeadlRegulVWAFSPt 002016
ROD: EV_HeadlRegulVWAFSPt_VW46.rod
VCID: 372B20CE6FCE78E3829-8062Subsystem 1 - Part No SW: 8U0 941 329 HW: 8U0 941 329 Labels: 3D0-941-329.CLB
Component: LeiMo links H01 0005
Coding: 8E0000Subsystem 2 - Part No SW: 8U0 941 329 HW: 8U0 941 329 Labels: 3D0-941-329.CLB
Component: LeiMo rechts H01 0005
Coding: 8E00001 Fault Found:
5279249 - Signal Line for Position Sensor for Right Swivel Module
C108E 11 [008] - Short to Ground
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 27
Reset counter: 143
Mileage: 124071 km
Date: 2020.11.26
Time: 11:49:22Can anyone advise me which part is at fault? Is it 7L6 907 357 C, which seems to be a control module? Is this easy to replace?
-
Thanks langers2k. I seem to have plugged the dab into the gps then. I'll have to get a dab adaptor.
-
I've now fitted the replacement PbA VW8128V unit. Everything seems to be working ok. Only one slight problem I've met. There were 3 cables connected to the columbus plus the quad lock, one with a white double connector, one with a black connector and one with a blue connector. I've connected the white one to the double space and the black one to the gps using an adaptor and the gps seems to work. I haven't connected the blue one as it didn't fit where I thought it would. What is the blue one for and is there an adaptor for it?
-
Thanks. I'll carry on and get one then, to replace my temperamental satnav.
-
I'm considering replacing my columbus with a PbA VW8128V, which seems to be the replacement for the VW8028V. From what you have written above, the installation process looks reasonably straightforward if you have all the necessary equipment to hand.
One question I have is that the Columbus is programmed in to work with the car's VIN, do these replacement units need to be programmed in the same way, or do they just work automatically?
-
Thanks for that. Also found this thread
Fuse 4 has blown. As suggested I have tried a 7.5a fuse and everything seems to be working again. I will have to have a look at the air quality sensor circuit.
-
I've got the same problem. The Oil Sensor Workshop message keeps coming up and I've just noticed the parking sensors are not working. What was the solution to your problem, or did you just ignore it? Was it wiring, a fuse or an actual problem with a sensor?
No bend lighting (AFS) function
in Skoda Superb Mk II (2008-2015)
Posted
Thanks for the comments, both of you. I shall have a closer look at the headlight.