Broadld

I took this to the garage and they replaced the oil pressure switch. But not sure which one they replaced.

Good morning all, Been having a look online for information on the error codes I am getting with OBD Eleven. Are there any output tests on the EGR I can run with OBD Eleven? I have seen online that removing the EGR is a bit of a pain. I am wondering if I could clean it in situ with and EGR cleaning spray. I have seen ones that you spray in the air intake. Do these actually work? Obviously they won't work as good as removing and manually cleaning. But if it is just a sensor with a bit of carbon on it, it might clean it off. If anyone can expand on what the error codes below mean that would be great. The car seems to run ok and there are no strange noises or rough engine running. Thanks David --------------------------------------------------------------- 01 Engine System description: R4 2.0l TDI Software number: 04L906026ES Software version: 1989 Hardware number: 04L907309R Hardware version: H23 ODX name: EV_ECM20TDI01104L906026ES ODX version: 002002 Long coding: 01190032034501087000 Trouble codes: P046C00 - EGR Sensor "A" Circuit Range/Performance Intermittent Date: 2022-07-07 16:03:22 Mileage: 135710 km Priority: 2 Malfunction frequency counter: 66 Unlearning counter: 255 Engine speed: 1191.50 1/min Normed load value: 0.0 % Vehicle speed: 45 km/h Coolant temperature: 87 °C Intake air temperature: 64 °C Ambient air pressure: 1000 mbar Voltage terminal 30: 14.420 V Dynamic environmental data: 209628102614CA10C2000017F500001331040711ED0702021211A90588 P040500 - EGR Sensor "A" Circuit Low Intermittent Date: 2022-07-07 06:26:56 Mileage: 135677 km Priority: 2 Malfunction frequency counter: 254 Unlearning counter: 255 Engine speed: 1262.00 1/min Normed load value: 66.3 % Vehicle speed: 3 km/h Coolant temperature: 88 °C Intake air temperature: 66 °C Ambient air pressure: 1000 mbar Voltage terminal 30: 14.340 V Dynamic environmental data: 2096281026130310C2000017F500001331009311ED0702021011A90249 P164E00 - Oil pressure regulation valve Electrical error static Date: 2022-07-06 16:05:27 Mileage: 135663 km Priority: 2 Malfunction frequency counter: 3 Unlearning counter: 255 Engine speed: 0.00 1/min Normed load value: 0.0 % Vehicle speed: 0 km/h Coolant temperature: 99 °C Intake air temperature: 87 °C Ambient air pressure: 990 mbar Voltage terminal 30: 12.100 V Dynamic environmental data: 209628111A000011BE0E82176E0011BC3A9C16250B5A162D0C1F

Excellent thanks for this info

I have a 66 plate 2.0 Diesel L&K Skoda Superb estate. It is coming up for its first service with me owning it. It has already had its cambelt & water pump replaced in April 2021. It has come up saying oil service in 200 miles. What I want to know is what is the service schedule for other service items. Such as Air filter, Pollen filter, Fuel filter, Gearbox fluid. I have searched for hours on Google and have found conflicting advice on different sites. I have only found in the manual that brake fluid is replaced every 2 years. I would rather over service it than under service it. As it will be a car I'm keeping for a while as I love it. Any help much appreciated

Excellent thanks. Gives me something to start with. When I googled the error it didn't come up with anything related to specifically Skoda

Can anyone help with this? Still don't know where the valve is located to check connections. Has anyone got a picture or can guide me in the right direction? Thanks Dave

@MrRich I rang dealer about mine and it depends what plate the car is. My 66 plate plate was 5 years or 140k miles. I think 2015 or older were 4 years or 140k miles. They used to be 10 years but apparently Skoda UK changed the years down. Not sure if this was due to premature failures. Other countries I think still have 10 years.

Thanks don't know how I missed this. I think I was searching for DPF rather than particle filter. For anyone else goto your car in OBD eleven garage > Control units > Engine > Live Data. There are quite a list of particle filter counters under there. Does anyone actually know what any of them mean? When the superb is doing a DPF regen is there any indication it is doing it? So you can make sure it completes before turning the engine off.

I don't have any issues but was wondering if it is possible to see the current saturation of the DPF filter with OBD eleven. I would be interested to see what it says. If you can is it displayed as a percentage? Can you get any more information like last regen time? Is there a light that displays when a regen is taking place?

Thanks a lot to everyone. It turns out the seat controller was replaced by the garage who sold me it. They didn't code it in to the car. Its been coded now and all works fine

@Sheriff Yes they were decent. Seemed to have quite a few nice cars there.

@Sheriff Yes I did

Hi guys OBDeleven scan below. I'm just wondering where this is located to check the connector / wires are ok. Has anyone got a picture with the location of it? 2.0 TDI 150 engine 66 plate 01 Engine System description: R4 2.0l TDI Software number: 04L906026ES Software version: 1989 Hardware number: 04L907309R Hardware version: H23 ODX name: EV_ECM20TDI01104L906026ES ODX version: 002002 Long coding: 01190032034501087000 Trouble codes: P164E00 - Oil pressure regulation valve Electrical error static

Got it booked in next week at a local Skoda specialist so I will let people know what the outcome is.

@Krosta Did you have to have the controller replaced at some point? As people are saying that the letter (F) indicates a newer controller. @Krosta Did you have to have the controller replaced at some point? As people are saying that the letter (F) indicates a newer controller.