FnLn

I haven't bought a wheel replacement kit (got car with the repair kit and huge ), but an aftermarket space saver spare 15" wheel (have a set of 16" alu wheels for summer 15" steel wheels for winter) with a cover and put some addiitonal things like show chains, tire pump, etc. on top of it, to utilize the whole space for the spare wheel My goal wasn't to pay less, but to use the most of the spare wheel space as the trunk is not that huge 😞

It's in the thread I've included in my reply to you. upd: 08.11.2023 Обновления ПО Bolero и Swing на Skoda Rapid 2G — Skoda Rapid (2G), 1,6 л, 2020 года | электроника | DRIVE2

I hope so However, I'm not confident 😞 My godfather with his 4x4 Superb 4 years old, much more expensive car than my Kamiq 1.0, still awaits software update to prevent turning on check engine light without any reason. He already knows which error is it, and reset it himself with obd 11. When is some other error, he goes to the shop and they always changes something.

According to the Wireless Aktivierungssoftware für Serien-SmartLink MIB III | autohaus-eckstein (skoda-sonneberg.de) update description should be.

I've alrady ordered it and went dealer after he verified that my model of Kamiq fulfills all requirements. However the activation was not successful due to a "multiple ODIS timeouts" on the current 1760 version. Of course I didn't pay a dime and the dealer opened a ticket at Skoda - I saw it on his monitor and still no update after ~3 weeks! Now I keep bothering them and again offer to bring the 1800 version so they can update my car and enable the wireless smart link

Since my dealer failed to active it (ODIS timeouted multiple times) on the my current version 1760, and apparently 1800 is still not official in Germany, so he can update my car, do you know whether your delaer activated wireless smarlink after the upgrade to the version 1800 or before? I left with the last resort, bombarding my dealer with facts from the varios forums to force him to do something about the version 1800, which I actually need also to be able to use my A54 phone. Many thanks in advance!

It should work. However, I haven't tried it. If you car is still in warranty the safest solution would be to go do dealer for free update. Though the 1800 version is still not offiicialy released to all countries - meaning that not in every country dealer could do update for you (e.g., in Germany).

Based on the version you have probably a Swing or Bolero infotainment system and the one in video is Amundsen - solely a touch screen without knobs. Regarding the updates you have other thread here on the forum where you can find links to the newer software versions and users' experience. You can find links to many software versions and in your case you have to do a few interim updates due to a very old version. 0464 => 0469 => 0741/0742 => 1233/1310/1760/1790/1798

Activation with ODIS at the dealer was unsuccessful. The tool didn't throw an error, but there was no feedback (endless loop) when trying to activate it. I didn't pay a dime. However, the price is 120€ for the upgrade 69€ + 51€ for the activation. The dealer will get back to me as soon as he receives an answer from Skoda, as he has opened a case. Before calling it today, he verified that they had ordered and used the appropriate upgrade according to Skoda's catalog. Hopefully to be continued! PS. When I was there, I asked for a Bolero software update to the 1800 version, and he told me that the last in Germany was 1760. Though he had heard about version 1800, which solves problems with S23/A54, he can not provide this service until this version is officially released for Germany.

I believe you are searching for MEN3_EU_SE326_xxxxL like MEN3_EU_SE326_P2295L firmware - MIB-Helper.com. BTW the latest version for SK370 is 1800 and I provided link in the thread. As I don't have SEAT I can't help you more.

For wireless AA you have to buy and activete by your dealer something like this Wireless Aktivierungssoftware für Serien-SmartLink MIB III | autohaus-eckstein (skoda-sonneberg.de) since you need FEC/SWaP for it. There are multiple variants (with different prices :)) and based on your car VIN any dealer can figure out which one you need and whether it's compatible with you car. I've scheduled an appointment at my dealer for this on the 22nd of November, so I can provide more feedback afterward.

Who already has WLAN and don't have wireless AA/CP can enalbe it with OBD11 by changing configuration. However who doesn't have WLAN needs to install FEC/SWaP 00070700,.and as MIB3 is not hacked, you have to buy code and activate it at some dealer. Afterward dealer changes configuration using ODIS, but one can do it also with OBD11.

For the MEN3 updates there is a link with all the versions and I posted yesterday the link for the newest one. Regarding wireless AA you have to buy and active by your dealer something like this Wireless Aktivierungssoftware für Serien-SmartLink MIB III | autohaus-eckstein (skoda-sonneberg.de) since you need FEC/SWaP for it. There are multiple variants and based on your car VIN any dealer can figure out which one you need and whether it's compatible with you car. However as you already have SmartLink, though I don't get it how you have a wireless Apple Car without a WLAN, but maybe it doesn't required WiFi as I use company iPhone as a paperweight. I've scheduled an appointment at my dealer for this on the 22nd of November, so I can provide more feedback afterward.

Anyhow, no newer version of AA module, so this version probably doesn't fix the already known problem with S23, A54... You can find a screenshot on the following link - Не прошло и полгода и вот опять 1798 →1800 — Skoda Rapid (2G), 1,6 л, 2020 года | электроника | DRIVE2.

MEN3_EU_SK370_P3355L MU1800 https://mega.nz/file/3KpRyKhJ#uSWK0XzCOAhi7XpH74j9lYjiiAaCjZ89cz_q_UtDSPM The newest update for those who want to test it.

Unfortunately, I can't help you with your problem. How did you figure out that your CAR fulfill all requiremens? There is also more expensive version and I found it only in Slovakia, Checz Republic and Netherlands eshop. I bought my car in Germany and so I'm wondering if I could buy it online and go to official service in Germany to enable WiFi functionality on my car.

There is no such thing, AFAIK They (not only Skoda) deliver all cars with beta software. Sometimes, there is no newer software fixing the identified problems. Why would they shame themselves by providing a change log?!

All you are searching for is on the link in my previous post. BTW I don't think it will help as AA versions are the same on both firmware versions (search this post and you can find it all on shared screenshots). I've never tried to downgrade firmware, so I don't know whether it works. Anyhow good luck!

on the following link hxxps://www.drive2.ru/l/650934799095051499/ you can find the information on the right version update paths and the link for almost all software versions

It seems you have Amundsen and there is a newer version on mib-solutions MOI3_EU_SKMQB_P32400P_0324 and you can review the discussion in the thread. As I don't have Amundsen, I can't guarantee anything!

Below, on the link you can see how it's done on Bolero (MEN3) MMI and from the manu you can find out what is your current version. Maybe it works also for the Amudsen, but I dunno. Regarding the newest availalbe version one I used OBD11, although many people online said it isn't so accurate and reliable. From my amateur experience isn't 100% up-to-date, but sufficent for my needs. ODB11 shows you the current and the newest available version for all modules in your car. For the 5F module, i.e., multimedia it shows 1790, the version which I use, where acutally there is also a 1798 version available (shared by members of this portal).

It took around 45 mintues for Bolero firmware. I've parked the car outside, since it's in my garage, turn the engine on and waited until update is done.

Hi, you can try wih the 308 version from the MOI3 - MIB Solution (guest:guest). However, I haven't used it as I have Bolero (MEN3) infotainment . I've succesfully applied the MEN3_EU_SK370_P2345L_1790 version to my car.

I had the same issue and in the official service they told me an update must be installed and it has fixed the issue for good!