AJK87

I don't know what month it was built but it does have sat nav which requires an SD card inserting into unit behind the glove box

Thanks for the reply Dave, It's a 2015 Octavia Scout. I'm not sure what infotainment system I have though

Hi all, After some advice, my infotainmnet touch screen has a mind of its own during colder/damper conditions. This is the second Autumn/Winter its done it. I don't really want to splash out on a an upgrade, just want to fix it as cheaply as possible. If I buy a second hand genuine screen (with some guarantee) is it as simple as just plug and play or is any coding required? Thanks in advance

Thanks Cairus but I don't know what relates to which bolts and my German isn't very good

2.0 TDI 150 Engine code CRMB

Could anybody provide me with the torque settings for the three bolts which hold the engine mounting bracket to the block please. This is obviously the mounting at the front end of the engine near the cam belt covers. Also, are these torque to yield bolts which need replacing? VIN is TMBMJ7NE7F01885189 thanks in advance Andy

For info for Scout owners I had a set of Octavia III Rhino front seat covers for a few years but was never that impressed with the fit. Once the waterproof backing started to delaminate off the back of the drivers one I decided to contact Rhino to see if they could sirt out a better fit on some replacement covers. Callum asked me for some photos and measurements and has now created a revised cover for the Scout seats. I'm really happy with the fit. I went for the all in one covers that go over the headrest as they're quicker to remove when you want a clean plush seat to sit on. I had them in black and with the map pockets on the back. They're a really good quality, solid, protective waterproof seat cover suitable for people that are looking for function rather than a fancy looking seat cover. I told Callum I'd give him a plug on here. The Scout version is listed seperately in a drop down menu on their website.

I can't over emphasise the importance of the pump learn procedure. Even if it is just the pump that is faulty, replacing it and not relearning the pump values might mean the right voltage isn't sent to the pump andnit still doesn't work, which could lead to in incorrect assumption that other hardware is at fault. Mine was relearned successfully with some none VAG diagnostic software at an independant garage. A decent independant shouldn't charge you too much to plug in and carry it out, it takes a few minutes. OBDeleven has the pump learn function as I've seen it on mine, I can't vouch for whether it does tho job prolerly though as I've had no need for it since fixing mine. Best of luck!

I've probably done 35k since the fix with a new pump and 4WD had never failed since. I've done a couple of fluid changes in that time, far more than is officially required but wanted to keep a close eye on oil and pump gauze. The fluid has never been that dirty when I've changed it since the pump change and flush. The gauze has had a bit of sludge on it but nothing major. I'd say the sludge is just friction material rather than debris from a failed clutch pack. So in summary the VAG dealer were talking B*****ks and had tried to grossly over repair my car. Still going strong now just from pump and flush and fluid (and critically a pump reset learned values procesure on diag machine which is essential) Thanks again to all that helped

If it helps, here's a photo from when I installed it

Mine doesn't have adaptive cruise control, just standard CC, so not something I had to consider. Isn't the radar for ACC behind the upper grille or bumper?

Thought I'd share a recent installation of a Lazer Lamp Triple R 1250 i-LBA lamp i fitted to my Scout in case it's of interest to anyone else. Lazer Lamp's technical guy said he's never fitted one to an Octavia or had enquiries from anyone doing so before me. The headlamps on my Scout are just bog standard lamps and they're rubbish. I really struggle driving at night and spend a lot of time driving in the Lakes and Highlands in Winter. The lamp was a serious investment which I spent a lot of time considering but I'm pleased to report that driving at night will never be the same again now, it's incredible. The intelligent Low Beam assist mode helps after switching from main to dipped beam and has a sensor which automatically reduces the output when other cars are detected or reflection from signs. Photos attached

Hi all, I have a 2015 Scout which gets well used in The Lakes where I live and a lot of use in the Highlands. The roads flood a lot where I live and I regularly drive through a Ford to access a field where the Mrs keeps her horse. I started to wonder about the breathers on transmission/diffs/Haldex etc Does anybody have knowledge of which of these have breathers and where they are routed, how high etc? Do people think there is much chance of them taking in water from my use of the vehicle? I've seen diffs ruined on transits years ago from just this. Anybody know how easy it would be to extend and elevate these breathers? Many thanks

Yep, now I've changed 2 bearings I should technically get it rechecked as I've had the ball joints off the arms.

Don't think you've seen my latest post - I've fixed the issue as of yesterday. My tracking is spot on, had it done when I replaced all four tyres. The noise was unmistakably a noisy bearing, it was just very hard to know which bearing. I thought NSF but yesterday has proven it was OSF. Dropped lucky with getting hold of 2 genuine VAG bearing kits complete with bolts for £70 a piece. So it's only cost me £140 to replace both fronts so I'm pretty chuffed, especially now my concerns of a gearbox bearing failure are put to bed! Thanks for the reply though, and to everybody else who offered suggestions