Albertron

I think my ecu 5ja919475a is not compatible with rear camera.

Yes, I definitely should have an option to activate the camera from module 10 or 76, but unfortunately I don't have the option.

My Skoda doesn't have module 76, and the camera I installed is a Lowline. Activating it on byte 19 of module 5F should be enough, but it doesn't work for me.

Hello. I have a Technisat MIB2 5C0 035 680B retrofit in a skoda spaceback 2014, and when I put it in reverse, the camera interface doesn't activate (it's a low camera). The parking sensor interface appears, with a new button that I think is to switch to the camera screen, but I can't press it. I've activated 5f-long coding-Byte 19-Bit 4. VPS and VPS_MSG_BUS are disabled. In module 10, I don't have any option to activate the camera, as I've seen in some cars. I also don't have module 76. In module 10-Adaptions-virtual display for park assist, I've set "rearview camera," and the interface doesn't activate either. I don't know what else to try.

Anyway, don't ask Pab567, he's going to want to suck you like a leech. The only language he speaks is money. And to your question, you can perfectly use obdeleven. It depends on the radio you buy, you may not need to modify the 5F module. I recommend that you use the VAG - MIB2 telegram group. The people there are good and they will not demand money from you.

Very good, thanks for nothing. Is this a help forum or a marketplace?

And you can't share or sell just the fix?

Oh, okay. I thought you were referring to the skoda firmware. I know the VW firmware, I was thinking about installing that firmware instead of the skoda one, but in the end I decided on skoda. But does that firmware bring the fix for the phone problem? It's the only thing I need, the rest of the options don't matter to me

Is there 480t firmware for Skoda_PQ? I have only seen ZR 480T and in PQ there is absolutely nothing on the internet. The latest version is the one I have, 0252T. I'm sorry but I can't send the radio. Shipping would be too expensive and it may also suffer damage in transit. Would it be possible to buy the firmware update and the fix?

I am from Spain. I have a VW 5C0035680B radio to which I installed MST2_EU_SK_PQ_P0253T and it has SWAP, CID and CP patched, but I have the problem that I cannot exit the phone menu on the maxidot. The only way is the one I read on this forum, which is by putting a route in the navigator. I have been using the radio for almost a year without any problem, without entering the phone menu. But for a few days now, every time I start the car, the phone menu appears. And it's quite annoying to have to do the navigator trick every time I start the car.

Hello. Could you give me the fix to solve the problem?

I installed a radio from a Volkswagen Scirocco. It is a MIB2 radio, which has Android Auto and integrated nav. They sell them ready-made for around €400-500, although you can also buy it and modify it yourself if you understand some computer science. I bought it in a scrapyard for €150 and modified it myself.

I'm revising this thread, because I'm still interested in having automatic lights. When this problem occurred, I did check with VDCS and something could be configured. Maybe it's possible to configure something to make it work?

Don't worry, enjoy your vacation. You'll pass it on to me when you get back. Have a good time

I have sent you a pm