Fab_MC86

I made a new post but in English, I can't delete it. :/

Hello everyone I have a 2013 Skoda Fabia 2 Rs, I don't have any pallets or basic steering wheel controls. I bought a steering wheel of Octavia 3 and Fabia 3 with the flat (with the paddles and steering wheel controls) I wanted to know if there were people who had already done everything and have help with coding because nothing found on the internet Thanks to all us

Try what?

Bonjour à tous J’ai une Skoda Fabia 2 Rs de 2013, je n’ai pas de palettes ni de commande au volant de base. J’ai acheté un volant d’Octavia 3 et Fabia 3 avec le méplat (avec les palettes et commandes au volant) Je voulais savoir s’il y avait des personnes ayant déjà fait tout et avoir de l’aide pour lz codage car rien trouvé sur internet Merci à tous

That's why on certain things I played with the limits, hence for the exhaust line, with a valve system to reduce noise. Afterwards for the Decata, I will see in two years at the technical inspection (I did the decata after my technical inspection)

Thank you very much, it means a lot to me ^^ if you want to follow the adventure, don't hesitate to follow me on the networks ^^ Normally in France it is also complicated, normally we do not have the right to modify the technical characteristics concerning the power. Finally it's very sharp

Hello everyone ! Following my first post that I made a little over a year ago, the project is progressing quite a bit! Here's where I'm at, engine preparation: - Turbo 1.4l TSi Hybrid RTMG - RTMG Dump Valve Kit (my old Dump Valve is for sale for those interested: Forge Motorsport FMDV1 Red 1.2/1.4l TSi) - MST Performance + Inlet full admission - APR Performance coils - NGK Iridium spark plugs - Complete 2.5' line with decatalyzed valve (formerly just a half full tube line with valve) made by ProWeld in France - SACHS PERFORMANCE reinforced clutch - Carto Stage 3 Full E85 - (Soon) Large volume intercooler (Installation and adaptation) + Custom Sural (Airtec Mk2 vRS targeted) Chassis preparation: ST Suspension STX coilovers (already done in the first post) (Soon installed) YTB Brakes front & rear big brake kits: Brembo 4 pistons / XTRA 312mm & Audi TT Mk1 disc: 280mm / Full Ferodo DS 2500 pads / Avia hose / Motul RBF 600 + Hard Race master cylinder reinforcement - (Soon) Full PowerFlex Silent Bloc Black chassis - (Soon) Hard Race chassis reinforcement: - Central lower reinforcement - Rear torsion beam reinforcement - Adjustable front stabilizer bar links - Added 24mm rear stabilizer bar - Front stabilizer bar 28mm - Front lower anti-ratio bar Michelin Pilote Sport 4S (18’) | Borbet Y (summer) Hankook Winter I*cep (17’) | Bola B26 (winter) If you have any questions, don't hesitate

@stephen321 Thanks 😁

Fabia Monté-Carlo Corrida Red Moteur : 1,2 TSi 90HP, boîte 5 rapports ( Stage 1 FlexFuel / BioEthanol = 130HP / 235nm de couple ) Filtre à Air Sport BMC Dump Valves FORGE CatBack inox sur mesure en 63,5mm avec valves en duplex Esthétique : Jantes 18' Borbet Y Glossy Black / Michenlin Pilote Sport 4S Etriers de frein peint en Rouge Covering Becquet arrière en Glossy Black Covering Carbone sur les éléments de la finition Monté Carlo (rajout lame AV, jupes latérale & diffuseur arrière) + Covering Carbone PAD intérieur Combinés Filetés ST Suspension Vitres teintées + Feux teintés Monogramme en Noir Paupière de phares avant Plaques française en noir Prochain projet -> Stage 3 (200HP) But / objectif -> faire une Fabia 3 vRS Mon Instagram : Fab_MC86