cammy2475

I have this issue also but trying to order the part but the number you stated 03L90608CC. Does not come up in any searches, is it missing a digit? The only sensor I can find comes up as 03L906088CC. Is this correct? Don't want to order the wrong part.

I assume it was due to blocked drain holes at either side of the bottom of the windscreen, I blew mine out with compressed air, there was of few soggy leaves in there and to protect the module when I re fitted it I put it in a small plastic bag with the opening at the bottom so the module could still breath and if the leak continued at least the module would be kept dry.

I have now managed to clear the airbag fault but the central locking electric windows and washer fault remains, Here is a VCDS scan:- Monday,09,January,2023,20:45:07:00009 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86 VCDS Version: 21.3.0.0 Data version: 20210226 DS325.0 www.Ross-Tech.com Gateway Installation List: 7N0 907 530 D 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: Malfunction 0010 09-Cent. Elect. -- Status: Malfunction 0010 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: OK 0000 17-Instruments -- Status: OK 0000 19-CAN Gateway -- Status: Malfunction 0010 25-Immobilizer -- Status: OK 0000 42-Door Elect, Driver -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 46-Central Conv. -- Status: OK 0000 52-Door Elect, Pass. -- Status: OK 0000 56-Radio -- Status: Malfunction 0010 -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Address 19: DTCs cleared -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Chassis Type: 1Z-SK35 (7N0) Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56 VIN: TMBCT21Z4B2167997 Mileage: 195340km-121378miles 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: Malfunction 0010 09-Cent. Elect. -- Status: Malfunction 0010 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: OK 0000 17-Instruments -- Status: OK 0000 19-CAN Gateway -- Status: OK 0000 25-Immobilizer -- Status: OK 0000 42-Door Elect, Driver -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 46-Central Conv. -- Status: OK 0000 52-Door Elect, Pass. -- Status: OK 0000 56-Radio -- Status: Malfunction 0010 ------------------------------------------------------------------------------- Address 01: Engine (J623-CAYC) Labels:. 03L-906-023-CAY.clb Part No SW: 03L 906 023 NJ HW: 03L 906 023 JH Component: R4 1.6l TDI H43 9978 Revision: --H43--- Serial number: Coding: 00114014032501080000 Shop #: WSC 73430 031 00083 ASAM Dataset: EV_ECM16TDI02103L906023NJ 003013 ROD: GV_ECM16TDI021VW32X.rod VCID: 7BF542EBF2E5695396-802E No fault code found. Readiness: 0 0 0 0 0 ------------------------------------------------------------------------------- Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb Part No SW: 1K0 907 379 BE HW: 1K0 907 379 BE Component: ESP MK60EC1 H31 0108 Revision: 00H31001 Coding: 133B201C09280001C81404ED90200091300000 Shop #: WSC 73430 790 00083 VCID: 76E353DFC1C7343BE9-8022 No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC (J301) Labels:| 3C8-907-336.clb Part No SW: 3T0 820 047 R HW: 3T0 820 047 R Component: AC Manuell H16 0401 Revision: 00001007 Coding: 0000000003 Shop #: WSC 73430 790 00083 ASAM Dataset: EV_ACManueBHBVW36X A01010 ROD: EV_ACManueBHBVW36X_VW46.rod VCID: 3E738BFFA177BC7BF1-806A 5 Faults Found: 13701376 - Function Restricted due to Missing Message(s) U1111 00 [008] - - [New feature! Extended UDS fault detail is only supported by current gen. interfaces] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 51 Reset counter: 1 13701408 - Function Restricted due to Missing Message(s) U1111 00 [008] - - [New feature! Extended UDS fault detail is only supported by current gen. interfaces] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 51 Reset counter: 1 13701456 - Function Restricted due to Missing Message(s) U1111 00 [008] - - [New feature! Extended UDS fault detail is only supported by current gen. interfaces] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 51 Reset counter: 1 9481748 - High Pressure Sensor B10AE 14 [008] - Open or Short to Ground Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 2 Reset counter: 1 9481200 - Refrigerant Pressure B10AB F0 [009] - Too Low Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 3 Reset counter: 86 Mileage: 104744 km Date: 2030.01.05 Time: 13:44:28 ------------------------------------------------------------------------------- Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb Part No SW: 1K0 937 085 H HW: 1K0 937 085 H Component: BCM PQ35 B+ 104 0615 Revision: 00104 AF Coding: 48000AB8A00508904008008011000024430000AE420081605CC4C7000041 Shop #: WSC 73430 790 00083 VCID: 3467A9D7973B662B17-8060 Subsystem 1 - Part No: 1Z2 955 119 D Labels: 1KX-955-119.CLB Component: Wischer 04051 26 0601 Coding: 00D7B7 2 Faults Found: 03396 - Supply voltage terminal 30 for central locking 011 - Open Circuit Freeze Frame: Fault Status: 01101011 Fault Priority: 1 Fault Frequency: 1 Reset counter: 118 Mileage: 195342 km Time Indication: 0 Date: 2023.01.09 Time: 17:32:49 Freeze Frame: Term 15 On Voltage: 14.75 V ON ON Term 50 On OFF OFF 00897 - Windshield Washer Pump (V5) 011 - Open Circuit Freeze Frame: Fault Status: 01101011 Fault Priority: 3 Fault Frequency: 1 Reset counter: 118 Mileage: 195342 km Time Indication: 0 Date: 2023.01.09 Time: 18:18:00 Freeze Frame: Term 15 On Voltage: 12.40 V ON ON Term 50 On OFF OFF ------------------------------------------------------------------------------- Address 15: Airbags Labels: 1K0-909-605.lbl Part No SW: 1K0 909 605 T HW: 1K0 909 605 T Component: Q4 AIRBAG VW8 020 2300 Revision: 05020000 Serial number: 0038PC25H55$ Coding: 0020788 Shop #: WSC 73430 790 00083 VCID: 3D718CF36471A763E8-8068 Subsystem 1 - Serial number: 6332MSME5F141355A Subsystem 2 - Serial number: 6342MSME5D427524E No fault code found. ------------------------------------------------------------------------------- Address 16: Steering wheel (J527) Labels:| 5K0-953-569.clb Part No SW: 1K5 953 521 AG HW: 5K0 953 569 Component: LENKS.MODUL 014 0140 Revision: FF010040 Serial number: 20110512200528 Coding: 4080140000 Shop #: WSC 73430 790 00083 ASAM Dataset: EV_SMLSNGVOLWSXS A01004 ROD: EV_SMLSNGVOLWS.rod VCID: 72EB6FCFA5AF281BC5-8026 No fault code found. ------------------------------------------------------------------------------- Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1 Part No SW: 1Z0 920 943 M HW: 1Z0 920 943 M Component: KOMBI H20 0420 Serial number: 00000000000000 Coding: 410A00 Shop #: WSC 73430 031 00083 ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04089 ROD: EV_Kombi_UDS_VDD_RM09_004_SK35.rod VCID: 4385FA0BCA95D1939E-8016 No fault code found. ------------------------------------------------------------------------------- Address 19: CAN Gateway (J533) Labels:. 7N0-907-530-V2.clb Part No SW: 7N0 907 530 D HW: 1K0 907 951 Component: J533 Gateway H35 0614 Revision: H35 Serial number: 261010F2000488 Coding: 358203 Shop #: WSC 04941 123 12345 VCID: 3169A0C3682953037C-8064 No fault code found. ------------------------------------------------------------------------------- Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb Part No SW: 5K0 953 234 HW: 5K0 953 234 Component: IMMO H20 0420 Serial number: 00000000000000 Coding: 000000 Shop #: WSC 00000 000 00000 ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008 ROD: EV_Immo_UDS_VDD_RM09_VW21.rod VCID: 6ADB77AF8D7FE0DB7D-803E No fault code found. ------------------------------------------------------------------------------- Address 42: Door Elect, Driver Labels:. 1K0-959-701-MIN3.clb Part No SW: 1T0 959 701 T HW: 1T0 959 701 T Component: Tuer-SG 009 2120 Coding: 0131700 Shop #: WSC 73430 790 00083 VCID: 489FED273BB3F2CB4B-801C No fault code found. ------------------------------------------------------------------------------- Address 44: Steering Assist Labels: 1K0-909-14x-GEN3.clb Part No: 1K0 909 144 M Component: EPS_ZFLS Kl. 69 3201 Revision: 00H20000 Shop #: WSC 73430 790 00083 VCID: 3467A9D7573B662B17-8060 No fault code found. ------------------------------------------------------------------------------- Address 52: Door Elect, Pass. Labels:. 1K0-959-702-MIN3.clb Part No SW: 1T0 959 702 R HW: 1T0 959 702 R Component: Tuer-SG 009 2120 Coding: 0131700 Shop #: WSC 73430 790 00083 VCID: 479DEE1B36ADFDB342-8012 No fault code found. ------------------------------------------------------------------------------- Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb Part No SW: 1Z0 035 156 F HW: 1Z0 035 156 F Component: BOLERO 010 0054 Revision: 0A001001 Serial number: SKZ1Z3L9529169 Coding: 000002000001 Shop #: WSC 73430 790 00083 VCID: 356194D39C417F2320-8060 No fault code found. End-------------------------(Elapsed Time: 01:42)-------------------------- I have checked all the fuses and they are all intact, in need of some guidance to rectify this. which was brought on by water getting into canbus gateway which has been dried out.

Thanks guys for the replies, I have dried out my original Canbus gateway and now have the car running only problem now is I have an airbag error which my my foxwell diagnostics can communicate with to erase the fault also have an issue with central locking, when I press the unlock button on fob you can hear the mechanism moving and the indicators flash but the boot doesn't unlock, also when I try to lock the car absolutely nothing happens, I can't lock the car, I have also received a replacement canbus gateway which I have fitted but the issues remain. The central locking issue only started when the canbus gateway failed.

Hi all, I`m new to the forum and have been struggling for the last few weeks to find the cause of my 2011 Octavia 1.6 TDI greenline to die. It suddenly thru up driver assist button failure along with ABS, steering sbs, brake failure warning lights, it would start and instantly cut out due to ecu immobilising engine cause of the faults. I checked all fuses they were fine and tried reading the fault codes but couldn't get communication with ecu, I have pinpointed the issue to the Canbus gateway, I removed it and found it full of water with corrosion round some of the terminals, I have ordered a replacement but my issue now is I will need to code the replacement gateway to the same settings/ installation list as the original one but how will I get the installation list if I cant read the original? Is there anyway I can find out what the setting should be for my original canbus gateway. I could plug and play but sone of the settings might not be the same and can thru up faults, any help with this would be very appreciated.

Hi all, I`m new to the forum and have been struggling for the last few weeks to find the cause of my 2011 Octavia 1.6 TDI greenline to die. It suddenly thru up driver assist button failure along with ABS, steering sbs, brake failure warning lights, it would start and instantly cut out due to ecu immobilising engine cause of the faults. I checked all fuses they were fine and tried reading the fault codes but couldn't get communication with ecu, I have pinpointed the issue to the Canbus gateway, I removed it and found it full of water with corrosion round some of the terminals, I have ordered a replacement but my issue now is I will need to code the replacement gateway to the same settings/ installation list as the original one but how will I get the installation list if I cant read the original? Is there anyway I can find out what the setting should be for my original canbus gateway. I could plug and play but sone of the settings might not be the same and can thru up faults, any help with this would be very appreciated.