Skip to content

badablade900

Finding my way
  • Joined

  • Last visited

Everything posted by badablade900

  1. Hi anyone know the correct torque settings for the injector clamp stretch bolt on my 2014 1.6 TDI Monte Carlo cayc.
  2. Hi does anyone know the correct torque settings for the injector clamp stretch bolt on my 2014 1.6 TDI . There seems to be different settings one is 7nm plus 280 and another of 8nm plus 180 degrees.🤯
  3. Yes code cleared fault took out for run 15mls seems fine again thanks for your help.
  4. Hi an update on my vehicle saw a video on yt of guy with same problems.The solution was code 11250 . Seems the three connection pump looks for sensor g250 on cars which only use two of the connections and have g85 hope this help someone in the future and thanks for all your assistance 👍
  5. Hi at work right know but I will take a look tomorrow thanks again for your help.
  6. So my thinking if the wiring is ok the pump sensor is at fault.😬
  7. Hi another pump from Skoda parts Europe the site you sent me on last post . Took car out today though light is still on steering assist seems to be working but I noticed on the scanner it wasn't reading any angle message.
  8. Do I need to recode the new pump as I have no reading off the old one as my VCDS could not connect with it .
  9. This is what the scanner shows when engine running.
  10. No connection between scanner and pump ,steering pump would come on then go off intermittently so checked wiring could see no fault changed battery was still the same .So changed pump and have connections to pump but fault showing
  11. Hi have just fitted new steering pump as last one failed with no communication issues.The new pump is showing fault 00816 POWER STEERING SENSOR (G250) 30-00 OPEN OR SHORT TO PLUS. any help would be appreciated.thanks.
  12. Hi thanks for your help will try fitting a replacement pump hopefully that will solve my problems.👍
  13. This is the original Iam assuming that it's the pump control module that's the problem.
  14. Ok thanks is the only control module on the pump or is there one on the rack
  15. Hi bought a recommended scanner here's a readout pic any ideas why it won't connect to steering.thanks
  16. Having power steering problems warning light comes on no power steering goes of it comes back.The car can be stationary when this happens had new battery fitted no change. Bought scanner here's pic of reading.
  17. Thanks for that 👍
  18. Hi thanks for that my patience has run out with Skoda local dealers wait time for diagnostic on problem 2 month?
  19. Hi VIN number is TMBFL25JXE3077334. ENGINE number CAYCY39631. Thanks for your help.
  20. Hi tried this changed battery for new one still have problems. The car has no power steering when light is on.The light can go out even when car is stopped at a junction then park it turn ignition of and when you turn it back on the light is back on . thanks.
  21. Thanks for your help will message you later
  22. Where do I find the correct pump for my Fabia 2014 1.6 TD .
  23. Hi does anyone know if the Hex-net 2 is a good diagnostic tool for skodas
  24. Recently steering warning light has come on with loss of power steering. This goes out and the power returns . What are my options any ideas on cost of replacing pump or rack at dealers Thanks.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.